- Pego Electronics (Yi Chun) Company Limited
- Main products: electric safety testing machine, , IEC & UL test probe, gauges, impact test machine, environment testing machine
Home > Products > IEC & UL Test Finger Probe > IEC60598-1 figure 29 Test Chain with a Resistance of 2.5Ω/m
IEC60598-1 figure 29 Test Chain with a Resistance of 2.5Ω/m
USD $100 - $800
/ Piece
1 Piece(Min.Order)
- 1000 Piece / Pieces per Month
- Shenzhen
- T/T
- 7 days
You May Like
-
IEC60884-1 Figure 28 Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin
-
IEC61000-4-4 EFT-5K16 Electrical Fast Transient Generator
-
IEC61000-4-4 Capacitive coupling clamp for EFT Generator
-
IEC61000-4-5 10KV Surge Simulator with 1.2us and 50us waveform
-
Ground Resistance Tester
-
IEC60695-2-20 Hot Wire Ignition Test Apparatus
Product Details
| Brand Name | Pego Group | Place of Origin | China | |
| Model Number | PG-TC |
Product Description
IEC60598-1 figure 29 Test Chain with a Resistance of 2.5Ω/m
1. Introduction
Test chain is designed according to GB7000.1 and IEC60598-1 clause 4.26.3 & figure 29 . It is mainly applied to provided a prevent the impairing of safety due to unintended short-circuiting of uninsulated accessible SELV part of opposite polarity. The test chain is made by copper zinc alloy (Cu: 30%, Zn: 37%), the chain shall have a resistance value of 2.5Ω/m±20% when stretched with a load of 200g/m.
2. Parameter
●Made of 63%Cu/37%Zn.
●Resistance value: 2.5Ω/m±20%
● Length: 1.1m
●Diameter: φ2mm
Contact Us
- Pego Electronics (Yi Chun) Company Limited
- Contact nameAlice Chat Now
Product Categories
New Products
-
IEC60335-2-17 clause 21.102 Blankets Mechanical Strength test Apparatus
-
Digital Charpy Impact Strength Tester Meet requirements of ISO179-2000
-
ISO180-2000 Digital Izod Impact Strength Tester with 3.5m/s Impact Speed
-
IEC60068-2-75 Calibration Device for Spring Hammer Calibration Device
-
IEC60068-2-75 IK02 Spring Hammer for 0.2J Impact Testing
-
IEC61000-4-5 Combination Wave Surge Generator with 6KV Output Voltage
-
EN60350-2 Figure 1 Standard Vessels for Cookware
-
GB21456 Low Carbon Steel Test Pans with Calibration Certificate issued by ISO17025 Lab
-
Hob Element meets the Requirements of IEC60335-2-6 and IEC60335-2-9 Chapter 21
-
IEC60335-2-9 Low Carbon Steel Test Vessels for Testing Induction Hotplates
-
IEC60335-2-9 Aluminum Test Vessels for Testing Hotplates
-
IEC60884-1Maximum and minimum withdrawal force Test Apparatus
-
IEC60884-1 Power Cord Anchorage Torque Test Apparatus
-
IEC60065 Figure 11 Plug Torque Test Apparatus
-
IEC60695-2-10 Lab Testing Machine Glow Wire Tester
-
Wall Mounted IPX1/2 Waterproof Testing Machine Meets the Requirements of IEC60529 Standard
-
IEC60068-2-75 IK01 to IK06 Impact Testing Machine Spring impact hammer
-
IEC61000-4-2 Electrostatic Discharge Generator
-
IEC61032 Jointed Finger Probe for IP2X Testing with CNAS Calibration Certificate
-
Calibrated IEC60529 IP5X and IP6X Sand Dust Chamber
-
IEC60068-2-75 IK07-IK10 Pendulum Impact Hammer Test Apparatus
-
IEC60335 Finger Nail Probe with 50N Thruster and CNAS Calibration Certificate
-
IEC60529 IPX34 Hand-held Spray Nozzle with 121 holes and Brass Nozzle
-
IEC61000-4-5 Lightning Surge Genenator with 6KV Output Voltage
Popular Searches
- marine hardware
- anchor chain
- link chain
- Roller Chain
- plastic chain
- Lifting Chain
- Steel Link Chain
- transmission chain
- Metal Chain
- drag chain
- Chain Sling
- Stud Link Anchor Chain
- Fishing Chain
- snow chain
- lashing chain
- safety chain
- Stainless Link Chain
- Transport Chain
- g80 chain
- lighting tester
- g43 chain
- Mining Round Link Chain
Recommended Products
- horizontal pull testing machine horizontal load testing machine horizontal tensile testing system
- 6500kn 650 ton Servo hydraulic Horizontal Tensile strength Testing system
- 5000kn 500 ton Servo hydraulic Horizontal Tensile strength Testing system
- 1000kn 100 ton Servo Horizontal Tensile strength Testing system
- 600kn Servo Horizontal Tensile strength Testing equipment
- WDL-50L Electronic Servo Horizontal Tensile Testing Machine
- peel strength testing solution peel test for adhesive tape ISO ASTM adhesive bond peel test method
- quality control peel strength machine production line peel tester portable peel test machine
- peel test with force-displacement curve real-time peel force display peel test data analysis system
- peel strength test machine with report software peel force measurement system adhesion force testing equipment
- constant rate peel test stage vacuum table peel test fixture anti-slip clamp for peel tester
- 180 degree peel test fixture peel strength clamp set test fixture for adhesive bond testing
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Product Tags:
Pego Electronics (Yi Chun) Company Limited
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Pego Electronics (Yi Chun) Company Limited
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Alice
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile