Supply Jinding brand heatless regeneration molecular sieve high pressure dryer

1) Molecular sieve high pressure dryer has the technical advantages of high safety performance, high working efficiency, small acetylene loss and long service time of filler. In line with the national capacity standard, molecular sieve is used as filler, automatic control, unmanned operation, and the filler does not need to be replaced for a long time. Safety valve is installed, which is safe and reliable. A water separator for recovering gas is installed to separate the blown steam and water and recover the gas into the gas holder. Check valve, stop valve, flame arrester and safety valve are installed between each single machine, so that the equipment and pipeline can always be in a safe state.

2) Features:

1. The strength design of the adsorption container of the dryer is calculated according to the explosion pressure of acetylene decomposition. Therefore, even if the acetylene in the container decomposes and explodes, the container is still safe;

2. The adsorption container is filled with molecular sieve desiccant, and the molecular sieve will not sink during use, and there will be no empty volume in the container and knock;

3. The operation of the device is automatically switched by the control system, so the operation is simple and the degree of automation is high;

3) Advantages:

1. The drying effect is good and can reach below 0.2g/m3 under normal working conditions

2. The filler will not sink, there will be no empty volume in the upper part, and the switching cycle is short, the designed volume is small and the safety performance is good

3. Large drying capacity, up to 80-160 m3 / h

4. It is easy to operate without frequent replacement of desiccant or manual regeneration of desiccant. The regeneration is completed by automatic switching

5. The replacement cycle of desiccant is long, generally more than two years.