Electromagnetic Stirrer M-EMS/F-EMS for Bloom(Round)

Electromagnetic Stirrer M-EMS/F-EMS for Bloom(Round) 

Mold EMS (M-EMS)

EMS inside mould using cooling water: EMS is installed inside the mould and uses cooling water system of the mould. It can be operated conveniently with low cost. Stirring freq:2~8Hz

EMS inside mould using clean water: EMS is installed inside water jacket of the mould and uses a separate cooling water system. Structure is compact and life is long. Stirring freq: 2~8Hz

EMS outside mould using cooling water outside: EMS is installed outside the mould with separate cooling water system. It is simple to change copper pipe. EMS can be used for wide range of sections. Stirring freq:2~5Hz

Copper pipe inner cooling type EMS: can be installed inside or out the mould, cramerwindings are adopted, which has even magnetic field without polarization. But magnetic leakage is too much with electromagnetic pollution cooling water quality has to be very strict and operation cost is higher. Stirring freq：1~6Hz

Final EMS (F-EMS)

F-EMS uses rotate field with long iron core. Central magnetic induction in strong and stirring range is wide. Stirring effect shall be ensured with alternating or intermittent stirring.