Double sensor automatic Sink mixer tap kitchen faucet water saving plastic aerator

Product Feature

This is a DIY device to change manual kitchen water tap to automatic sensor tap. Users just need to install our sensor device to their current kitchen tap to make it as sensor tap. There are six different sizes mounting connectors to fit different kitchen taps, which means our sensor device will match almost all kinds of kitchen taps.

1) Side Sensor----This is wave-on sensor. Function: Hands wave once, water automatically flows while hands wave again water automatically stops. Security stops 3min.

2) Bottom Sensor----This is automatic sensor. Function: Hands in sensor range, water automatically flows while hands out of sensor range, water automatically stops. Security stops 3mins. 

3) Time Limit: Washing time is set for 3 mins for both sensors. It means the sensor will automatically stop water flow if water continously flows for 3mins.

4) Low power indication: Sensor LED continously flash 5 times to indicate low power. This may indicate it is time to replace existing batteries with new ones or there is not enough power going to unit. 

5) Water saving: Water efficient faucet reduces overall water usage without sacrificing water pressure.

6) Energy saving: Battery shall last approximately 25 circles per day for about 2 years.