FA 550 - Dew point sensor in robust die-cast aluminum housing

FA 550 - Dew point sensor in robust die-cast aluminum housing

Robust dew point sensor for compressed air and gases

The FA 550 is ideally suited for outdoor dew point measurement and reliably determines dew points even under harsh industrial conditions.

Application examples

Dew point measurement in compressed air systems after adsorption dryers, membran dryers or refrigeration dryer

Residual moisture measurement and dew point measurement in gases such as: oxygen, nitrogen, argon, hydrogen, natural gas, biogas...

Special features of the dew point sensor FA 550:

Robust, waterproof die-cast aluminum housing, IP 67

Alarm relay - limit value adjustable via buttons (max 60VDC, 0.5 A)

4 ... 20 mA analog output

Optional: 2 pieces 4 ... 20 mA analog output e.g. for dew point and temperature

Extremely long-term stable

Fast adjustment time

Pressure resistant up to 500 bar (optional)

NEW: Modbus RTU interface

NEW: Ethernet interface (optional)

NEW: Higher resolution of the sensor signal due to improved evaluation electronics

NEW: Sensor diagnosis on-site with handheld device or CS Service Software

Readable via Modbus: pressure dew point [° Ctd.], temperature [° C], rel. humidity [% RH], abs. humidity [g / m3], degree of humidity [g / m3], moisture content V / V [ppmV / V], Partial vapor pressure [hPa], atmospheric dew point [° Ctd.atm]