Original slewing bearings/slewing ring bearings

Original slewing bearings/slewing ring bearings

2. Single-row crossed roller series.
3. Double row ball series.
4. Three-row roller series.
5. Roller and ball combination series.
6. Lightweight outline slewing ring

a slewing bearing is a rotational rolling-element bearing that typically supports a heavy but slow-turning or slow-oscillating load, often a horizontal platform such as a conventional crane, a swing yarder, or the wind-facing platform of a horizontal-axis windmill.

Compared to other rolling-element bearings, slewing bearings are thin in section and are often made in diameters of a metre or more; the slewing bearings on the Falkirk Wheel are 4 metres diameter and fit over a 3.5 metre axle. Slewing bearings resemble oversize aircraft control surface bearings.

Slewing bearings often use two rows of rolling elements. They often use three race elements, such as an inner ring and two outer ring "halves" that clamp together axially.

Slewing bearings are often made with gear teeth integral with the inner or outer race, used to drive the platform relative to the base.

Slewing bearings are generally manufactured in very large diameters. For that reason on site inspection capabilities is necessary. Backed by years of slewing bearing application experience and manufacturing knowledge

Parts of Slewing bearings specifications: