NPM-TT2 multi-function placement chip mounter machine

Panasonic NPM-TT2 multi-function placement machine parameters:

Model name: NPM-TT2

Model: NM-EMEJM1E

pcb pick and place NPM-TT2 can be directly connected to NPM-D3/W2 to form an SMT production line.

Placement heads of the NPM series (lightweight 8-nozzle placement head, 3-nozzle placement head V2)

The specifications of the panasonic mounter NPM supply department can be selected and changed

Adopt multifunctional recognition camera

High productivity with completely independent installation

Support pin automatic replacement function (optional)

Check options before suction

Transfer unit (optional)

PCB substrate size:

Single track type: L50mm*W50mm～L510mm*W590mm

Double track type: L50mm*W50mm～L510mm*W300mm

M substrate size:

Single track type: L50mm*W50mm～L510mm*W510mm

Double track type: L50mm*W50mm～L510mm*W260mm

Substrate replacement time

Single track type: 4.0s (when no components are mounted on the reverse side of the substrate)

Dual-track type: 0s*It cannot be 0s when the cycle time is less than 4.0s.

Power supply: three-phase AC200, 220, 380, 400, 420, 480V 2.5kVA

Air pressure source: Min.0.5MPa, 200L/min (A.N.R.)

Equipment size: W1300mm*D2798mm*H1444mm

Weight: 2690kg (Only for the main body: Varies depending on the configuration of the options.)

Placement head: 8-nozzle placement head (when equipped with two placement heads)

Mounting speed PC size: 36000cph (0.1s/chip)

M size: 34920cph (0.1s/chip)

Mounting accuracy (Cpk≥1): ±40μm/chip, ±30μm/QFP 12mm~32mm, ±50μm/QFP 12mm or less

Component size: 0402 chip*6~L32mm*W32mm*T12mm

Component supply Taping taping width: 4~56/72mm

Placement head: 3-nozzle placement head*5 (when equipped with 2 placement heads)

Mounting speed PC size: 14400cph (0.25s/chip) 11800cph (0.31s/QFP)

M size: 13968cph (0.26s/chip) 11446cph (0.32s/QFP)

Mounting accuracy (Cpk≥1): ±40μm/chip ±30μm/QFP

Component size: 0603 chip~L150mm*W25mm (diagonal 152)*T30mm

Component supply Taping taping width: 4~56/72/88/104mm

Component supply Taping: front and rear tray feeder specifications: Max.52 even

Front and rear exchange trolley specifications: Max.120 even

(Tape width: 4/8mm thin single feeder and double tape feeder, small reel)

Rod shape: front and rear tray feeder specifications: Max.6 even

Front and rear exchange trolley specifications: Max.14 even

Tray: Max.40 pieces (front side supply part: Max.20 pieces + rear side supply part: Max.20 pieces)