Medium Frequency Induction Heating Machine

JKZ,induction heating power supply, can provide you a complete induction heating equipment experience service. Our service staff will give customers a full response immediately,We can provide induction heating machine, industrial induction heating system, induction heating device, induction heating equipment and so on, and meet the customer's various needs for equipment.

If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate frequency induction heating equipment is your most correct choice. The preheating metal before welding needs pre heat treatment in welding, which include preheating before welding, preheating in welding. In which we need care about preheat temperature for welding and methods of preheating in welding.

Medium Frequency Induction Heating Machine Types

MFS-120A

1-8KHZ 120KW 182A

MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine

MFS-160A

1-8KHZ 160KW 250A

MFS-200A 1-8KHZ 200KW 310A Medium Frequency Induction Heating Machine

MFS-200A

1-8KHZ 200KW 310A

MFS-250A 1-8KHZ 250KW 380A Medium Frequency Induction Heating Machine

MFS-250A

1-8KHZ 250KW 380A

MFS-300A 1-8KHZ 300KW 460A Medium Frequency Induction Heating Machine

MFS-300A

1-8KHZ 300KW 460A

MFS-350A 1-8KHZ 350KW 530A Medium Frequency Induction Heating Machine

MFS-350A

1-8KHZ 350KW 530A

MFS-400A 1-8KHZ 400KW 610A Medium Frequency Induction Heating Machine

MFS-400A

1-8KHZ 400KW 610A

MFS-500A 1-8KHZ 500KW 760A Medium Frequency Induction Heating Machine

MFS-500A

1-8KHZ 500KW 760A

MFS-600A 1-8KHZ 600KW 910A Medium Frequency Induction Heating Machine

MFS-600A

1-8KHZ 600KW 910A

Advantages of Medium Frequency Induction Heating Machine

The induction heating speed is fast and the temperature uniform is good. The MFS series induction heating power supply can design the operating frequency according to the actual needs of customers. The workpiece is non-contact heating. The metal workpiece heats itself through the alternating eddy current, which has high efficiency and a good temperature uniform effect.

The induction heating energy efficiency is high. As a mature medium frequency induction heating series, the MFS series adopts IGBT and adjusts the power by adjusting the wave, and uses high-quality copper material as the main circuit base layer, which can effectively reduce the loss of the components and the circuit itself.

The design of this medium frequency induction heating machine can also allow customers to directly set the working status (power, working mode, etc.) of the heating equipment through the touch screen. At the same time, customers can also accept external PLC control through RS485 or reserved external signal I/O modules.

Standard MFS can be applied to wide voltage fluctuation (*360V~440V), and non-standard voltage power supply can also be customized according to the actual situation of customers.

This medium frequency induction furnace is also equipped with a condition monitoring system(CMS) and a built-in condition detection system just like any other induction heating system launched by JKZ. Through the single-chip microcomputer, this medium frequencty induction heating series can effectively monitor the temperature, current, voltage, water flow, etc. of the main components of the equipment. Problems like overvoltage, undervoltage, overtemperature, water shortage, phase failure, and overcurrent can be easily detected.

With different output modules, MFS series induction heating power supplies can complete induction forging, induction quenching, and non-ferrous metal induction smelting.