Aluminium Sheet for Tankers Baffle

The inner structure of an aluminum alloy load tanker consists of bulkhead, baffle and corresponding supports. Baffles are bulkheads that have holes in them to let the liquid flow through. The baffles help control the forward and backward liquid surge. In these trailers, the internal movement of the product is minimal.

The longitudinal baffle is for reducing the left and right fluctuations of the liquid in the tank body. The transverse baffle is for reducing the front and back fluctuations of the liquid in the cylinder. In order to facilitate maintenance, there are also manholes with a diameter of not less than 550 mm on the transverse baffle. For better anti-waving effect, the manholes of different baffles in the same compartment.

The installation of the baffles enables the fuel tanker withstand the impact of the vehicle during the transportation process and have sufficient corrosion resistance. It also contributes to easy maintenance, lessen the vehicle weight and meet the safety performance of oil transportation.

The rigidity of the aluminum baffles is good, which is 30%-40% stronger than other material. It also can realize seamless fit to the cylinder to ensure the assembly quality of the cylinder and the baffles.

• Each piece of aluminum plate for fuel tanker will be covered with paper or film to ensure its smooth surface.

• Plastic or kraft paper packages are used to prevent the aluminum sheet from the moisture and rain.

• Install wooden pallets and use steel belts to reinforce them to avoid collisions during transportation.

• The Aluminum sheets are packed in wooden boxes and brackets with fumigation marks.

• The packaging can also be customized according to the customer's other packaging requirements

Welcome to contact us directly on our website: /aluminium-sheet-for-tankers-baffle