Gas Turbine Filter Element DL007002

The maintenance content of the return oil filter. It is necessary to regularly check whether the connecting pipe of the filter is firm, and whether there is leakage or damage. If one of the above-mentioned problems is found, immediate maintenance is required to bring safety hazards to future work. The second maintenance content of the return oil filter is to open the filter upper cover of the filter correctly, then unscrew the lifting cap of the upper cover, and then lift the upper cover to set an angle. The maintenance content of the return oil filter. Third, check whether the valve at the inlet and outlet of the filter has been closed tightly. Check the pressure gauge fashionably to make sure that the internal pressure must be zero. Like a bag filter, the filter needs to be separated from the piping system, and then the drain valve is opened to drain the remaining liquid in the filter before working. This is necessary for the maintenance of the filter. If this is neglected, the use of the return oil filter will increase the degree of danger. Filter maintenance content four. Check the use environment of the filter to ensure the safety of the use environment.The advantages of large dirt holding capacity, etc., suitable for hydraulic lubrication systems with large flow

The high-pressure filter element is one of the filters with very high market application. The high-pressure filter is widely used in coal mining machinery, metallurgy, chemical industry, petroleum, papermaking, food, mining, electric power, and is used in various industries in the urban area. Industrial waste, recycling, water filtration, emulsification, oil filter, metallurgical pouring water system, hot water boiler system, hot-rolled high-pressure water descaling system. This advanced, powerful and easy-to-use automatic filtering. Simplify the filter, stainless steel filter, parts factory, electric drive and control. 1. The cleaning of the high pressure filter element can be set within 2.24 hours. Electric actuator, the beginning of the water filter, the next 30 turn the drain valve, the electric valve actuator stops the carton position to 60, rotate 90 degrees, turn on the water for 30 to 60 seconds, and change the path of movement. Operate the valve to reset, 3-5, and then continue to fill in the choeul to close the socket. 2. The high-pressure filter element pressure control controller resets and the 3-5 discharge volume continues to rotate the butterfly.

ZA3LS400E2-FN1 return oil filter element

ZA3LS160E2-MD1 return oil filter element

return oil filter element 21FC5121-140*250/25

21FC5124-160*800/25 return oil filter element

21FV1312-2200,51-40B filter

return oil filter 21FC5121-140*400/20

21FC5121-110x250/50

21FH1330-36,51-10 return oil filter

21FC1421-160*600/3

21CC1224-150*915

C13-110*250A50

C13-140*400A10a

21FC5121-160*800/20

21FC5124-160*600/25

return oil filter 21FH1320-60

return oil filter 21FV1314-1700

Replacement for Internormen Filter Element 01E.150.3VG.NR.E.P

Replacement for Internormen Filter Element 01E.60.10VG.NR.E.P.VA

P3.0510-53 P3.0510-62 P3.0520-00 V5.1240-07 Replacement for ARGO Oil Filter Element

P3.0520-01 P3.0520-02 P3.0520-05 Replacement for ARGO Oil Filter Element

P3.0520-51 P3.0520-52 P3.0520-62 Replacement for ARGO Oil Filter Element

P3.0525-01 P3.0607-01 P3.0613-51 Replacement for ARGO Oil Filter Element

P3.0613-52 P3.0620-51 P3.0620-52 Replacement for ARGO Oil Filter Element

P3.0623-02 P3.0623-11 P3.0712-00 Replacement for ARGO Oil Filter Element

P3.0712-01 P3.0713-01 P3.0720-00 Replacement for ARGO Oil Filter Element

P3.0720-01 P3.0730-51 P3.0730-52 Replacement for ARGO Oil Filter Element

Replacement for ARGO Filter Element P3.0817-01 P3.0817-12 P3.0823-01

P3.0823-12 P3.0833-01 P3.1117-10 Replacement for ARGO Filter Element

Replacement for ARGO Filter Element P3.1117-00 P3.1123-00 P3.1123-10

S2.0613-00 S2.0613-05 S2.0613-10 Replacement for ARGO Filter Element

Replacement for ARGO Oil Filter Element S2.0613-15 S2.0717-10 S2.0720-05

Gas Turbine Filter Element 21FC5121-110x250/10

Gas Turbine Filter Element 21FC5121-110x250/25

Gas Turbine Filter Element 21FC5121-110x160

Gas Turbine Filter Element 21FC5121-110x400

Gas Turbine Filter Element 21FC5121-140x250

Gas Turbine Filter Element 21FC5121-160x250

Hydraulic Return Oil Filter 21FC5121-160x600

Hydraulic Return Oil Filter 21FC5121-160x400/180

Hydraulic Filter Element ZALX-160x400-BZ1

Hydraulic Filter Element ZALX-160x600-BZ1

Hydraulic Filter Element ZALX-110x160-MD1

LXKF-100A*25D power plant filter element

Thin oil station double cylinder oil filter LXY143*444/80 (0240)

Self-circulating filter element L1000.00.03

Return oil filter element LXKF-100B*180D

Pall line filter element 21FH2100-25, 61-180

Lubrication filter C9209011

Xinhua Hydraulic Filter XJL.02.09

Replace air compressor air filter 1621-5742-00

SNH806 Roots blower inlet stainless steel filter element

Ice machine essential oil filter A8021-14-05

Suction filter G601-21-09

Replace steam turbine oil station filter 21FH1330-60,51-10

LXY96*278/10(0258) power plant coal mill oil station filter element

Suction filter WU-160X100J

The filter is directly installed on the oil tank cover, the filter head of the filter is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is equipped with a pipe and flange connection, which simplifies the system pipeline and makes the system layout More compact, easier to install and connect.

Filter element LH0030D3BH/HC

Steam turbine EH oil station filter PG050GH

LXY143*400/80(0257) Power plant steam turbine filter element

High pressure filter element L1000.00.10

Lubrication system filter C9209011

Xinhua Oil Station Hydraulic Filter EH30.00.03.10

Stainless steel return oil filter XW-850x40H

Lubricating oil station filter LXKF-125A*40D

Turbine filter element DP405EA03/-W

Fuel tank fine filter 0508.608T1201.AW007

Coal mill filter element F122*350

replace power plant filter element RP8134F0316Z

Chemical plant air separation equipment filter element BLG-1800*10FS

Replace Rexroth high pressure filter R901025359

Replace parker filter element TTF310QLBP2EG121

Top shaft oil pump filter DP602EAOFT

Replace Emerald filter CU040P25N

Turbine hydraulic system filter element 21FV1222-1300,15-10

LXY96*339/20 (0243) Return oil filter element

Replace pall Duplex Filter HH387DJ08OMXFC7-CH0038

Replace pall lubricating oil filter HH367DJ06OMXFGV7C-CH0038

Pre-pump filter element DL002001

This filter is used to filter the oil return of the hydraulic system to filter out the metal particles generated by the wear of the components in the hydraulic system and the rubber impurities of the seals, so that the oil flowing back to the oil tank is kept clean.

The filter is installed on the top of the fuel tank, the cylinder part is immersed in the fuel tank, and is equipped with bypass valve, diffuser, filter element and other devices such as polluting and blocking the indicator. It has the characteristics of compact structure, convenient installation, large oil flow capacity, low pressure loss and convenient filter element replacement.

Performance and characteristics