Rain proof test machine IPX Rain Spray Water Resistant Testing Machine cabinet electronics dust proof tester

 plug cord cable bending flexing tester

Summary:

IP Class Rain Test Chamber is used to simulating the lighting , auto parts , household appliances and other products in condition of moisture or rain , to see the influence of water to the products. Through this can test the resistance to the rain penetration and moisture proof ability of products.

Rain spray testing through a rigorous scientific design, making it can realistically simulate dripping rain, splashing water , water spray and other environment. It uses advanced controlling system and inverter technology , making the rotation angle of the specimen frame, the swing angle of the oscillating bar and  the water swing rate can be automaticallyadjusted.

Structure of IP Class Rain Test Chamber, Water Spray Resistance Chamber

The outside layer is composed of the high quality stainless steel plate, the inner container is the composed of stainless steel tabula rasa.

Large area of visible glass door, easy to observe the test specimens in the testing chamber

The button is made of high quality of tank, can be fixed PU activities wheel, it is convenient for user moved.

With 270 degree swing pipe & 360 degrees whorl pole water jet device.

Adjustable speed samples stage.

Control System:

(Germany) admiralty. Per stig moller programmable controller to complete the contrl of the whole system of time and sequence.Adopt imported frequency converter speed effectively guarantee the test according to the standard operation.Equipped with water filter.

Specifications:

ip class water/rain spray resistance test chamber

IPX1/2 Vertical Rain Drop Test 
1.  Meet the requirement of IEC60529 standard IPX1 vertical rain drop test and IPX2 15°inclination rain drop test.
2.  Rainfull capacity:  IPX1: 1 ±0.5mm/min    IPX2 : 3 ±0.5mm/min
3.  Water drop chamber effective droping area: 1000*1000mm, water droping hole diameter: Φ0.4mm, hole distance: 20*20mm
4.  Water drop chamber uses vaccum design, match with oxidation alloy aluminium and high rust stainless steel material  structure, nozzle contact a brass tapered design, convenient in installation and replace needle tip.
5.  Rain drop device can automatically lift, nozzle is located in 200mm from the highest point of test sample, and equipped with protection devices to ensure it would not drop too fast. It can also lift manually.
6.  With compressed air dry function, when the experiment is complete but will drop out the excess water clean, avoid long time water dirty jams needle tip.
7.  Dc electric lifting motor drive, stainless steel wire rod, pulley guide with locking nut lifting device.
8.  Aluminum alloy and stainless steel fuselage; Hang to the wall or four column equality lifting.

Absorbed manufacturer for mechanical properties measuring equipment. Specialized clamps to exactly fit your test request!