Home > Products > More Products > 3/8' Screw Steel Pellet Igniter for Pellet Stoves/ Boilers
3/8' Screw Steel Pellet Igniter for Pellet Stoves/ Boilers
- T/T Credit Card
You May Like
-
D10x145 230V 300W Pellet Stove Resistance in Screw 3/8" Glow Plug Ignition New
-
D10x155 230V 250W Pellet Stove Resistance in Screw 3/8" Glow Plug Ignition New
-
10mmx145mm 230V 250W Stainless Steel 304 Sheath Cartridge Heaters New
-
D10x140 230V 300W Pellet Stove Resistance in Screw 3/8" Glow Plug Ignition New
-
HEATFOUNDER Stainless Steel Cartridge Heater Heating Element Used for Humidifier
-
OEM 10x120mm 12v 80w Cartridge Heater With 3/8'' Thread for Water Heating
Product Details
| Brand Name | HEATFOUNDER | Place of Origin | Shanghai, China | |
| Type | Immersion Heater | Certification | CE | |
| After-sales Service Provided | Overseas third-party support available | Warranty | 1 Year | |
| Weight | depends | Dimension(L*W*H) | customised | |
| Condition | New | Voltage | 12-480v, customised | |
| Power Source | Electric |
Product Description
1. Element is allowed to work under the following conditions:
A. Air relative humidity is not more than 95%,non-explosive and corrosive gas.
B. Working voltage is not greater than 1.1 times of rated value.Shell should be grounding effectively.
C. Insulated resistance is enqual and more than 1MΩ. Dielectric strength: 1.5KV/1min.
2. Heater should be fixed at suitable location. Effective heating area must be dunked or put in metal solid.It's strictly prohibited to burn emptyly.
If find the surface of tube body has scale deposit or carbon form, you should clean it firstly and then use,so as not to affect heat dissipation to shorten its life span.
3. Heating fusible metal or solid nitrate,alkali,asphalt,paraffin wax,etc.,you should reduce use voltage,after medium melting,you can rise it up to rated voltage.
4. Heating air element should be with cross and homogeneous permutation, in order to make the element has good cooling conditions and make air flow be fully heating.
5. When heating nitrate,you should conside safety measures to prevent explosion accident.
6. Connection wire part should be put outside of thermal insulation layer to avoid contacting with corrosive and explosive medium and water. Connection lead wire should be able to bear temperature of connection wire part and heating load for long term. Connection wire screw fastening should avoid overexert.
7.Element should be stored in dry place.If insulated resistance is less than 1MΩ because of laying aside for long-term, you can put it in an oven at about 200 degree centigrade for drying,or else reduce the voltage for electricity heating,until recover insulation resistance.
8. Magnesia powder at heater outlet end should be protected from pollutant and moisture infiltration in using places to prevent electric leakage accidents.
9. If it's used to heat mold,it should avoid heating part in the mold external heating. If in the air heating,heat dissipation will be difficult which makes temperature of heater too high, and it will cause short circuit.
High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.
High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.
High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.
Factory
Workshop
Showcase
Team
Packing Details : standard safe carton box, plastic pallet
Delivery Details : 3-30 days after order of Solid bicycle tire tubes
Picked up customers at Hongqiao airport which is near to our company
Take customer to Shanghai Eastern pearl tower which is representative building of Shangahi
Meeting customers in our factory
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free based on the cost or sample,but do not pay the cost of freight.
Q: What is your terms of payment ?
A: T/T in advance,western union or paypal.
If you have another question, pls feel free to contact us as below:
Tel: +86-21-22810889 Fax:+86-21-22816889
Q: What type of package do you use?
A: Standard safe carton boxes, or pallets based on goods.
Q: What's transport way?
A: We send goods by courier, by air or by sea,based on your needs.
Contact Us
- Heat Founder (Shanghai) Industrial Co., Ltd.
Product Categories
New Products
-
230V 850W L Type SUS316 Heater Cartridge Heater
-
9.5mmx140mm 230V 300W Stainless Steel 316 Sheath Cartridge Heaters
-
2020 Year Factory Tank Heating Elements Water Heating Element 15x130mm 12V 30W
-
2020 Year 15x130mm 12V 30W Electric Rod Heating Element Tank Heater
-
2020 Year 15x130mm 12V 30W Electric Hot Water Heater Immersion Heating Element
-
20x300mm 220V 1200W Tube Mold Cartridge Heater Heating
-
2020 Year Stainless Steel 12V Cartridge Heating Small Heating Element
-
2020 Year Electric Hot Water Tubular Heater Immersion Heating Element New Products
-
Customized High Quality High Temperature Resistance Cartridge Heater for Injection Molding Machine
-
Customized High Quality High Temperature Resistance Long Working Life Heat Rod Tubular Heater
-
CE Certificate Resistance Heating High Temperature Resistance Single Head Cartridge Heater
-
12 Volt 100 Watt Sus 304 Flanged Immersion Tubular Heater
-
Customized Cartridge Heater Power Voltage Industrial Appliance Stainless Steel Heater Heating Elements
-
Industrial Water Heater Elements With Pipe 10mm
-
Stainless Steel 304 W U I Type Electric Finned Flexible Tubular Air Heater
-
OEM Stainless Steel Water Boiler Flange Immersion Electric Oil Heating Element
-
2kw 3kw 5kw 6kw Immersion Tubular Heater
-
Screw-in Water Heater Immersion Heater
-
Tube Cartridge Heater 1000w Flange Heater Cartridge 20w
-
Tube Electric Mold Filling Machine Ptc Cartridge Heater
-
Heating Element Cartridge Heater Water Electric Industrial Cartridge Heater
-
Customized Stainless Steel Quality Mold Heating Element Immersion Cartridge Heater
-
Custom High Quality Stainless Steel Electric Factory Heating Elements
-
Alumina Ceramic Ignition Pin Needle Ceramic Igniter
Popular Searches
- resistor
- heating element
- heating tube
- ceramic heater
- heating cable
- heating wire
- cartridge heater
- tubular heater
- band heater
- electric cartridge heater
- silicone rubber heater
- immersion heater
- water immersion heater
- igniter
- heating mat
- mica heat plate
- mica heating plate
- electric mica heater
- electric band heater
- ceramic band heater
- electric oil heater
- other water heater
- heating element heater
- coil heater
- heating rod
- variable wattage
- semiconductor heater
- wire accessory
- heating component
- cartridge heating element
Recommended Products
- 1000L IBC Water Tank Industrial Heating Blankets Heated Jackets
- Thanh Gia Nhi?t Cacbon Silic,Thanh Cac Bon Silic
- Ph?n t? Gia Nhi?t MoSi2 ,Thanh Silicon-molypden, b? Ph?n Làm Nóng ?i?n Molypden Disilicide
- Elementos de Aquecimento de Carbeto de Silício(sic),calefator de SiC, Elemento de Aquecimento de SiC
- Elemento de Aquecimento MoSi2, Elemento de Aquecimento do Disilicídio do Molibdênio
- Los Elementos de Calentamiento de Carburo de Silicio (sic)
- Elementos de Calentamiento MoSi2
- élément Chauffant SIC,élément Chauffant en Carbure de Silicium
- Siliziumkarbid-Heizelemente(sic),Heizst?be Aus Silizium-Karbid
- 1800 Heizst?be Aus Molybd?n-Disilizid
- 650 Degree Fast Heating Drying Heat Shrinkable Film Industrial Hot Air Heater
- Corkscrew SIC Heater
Find Similar Products By Category
- Consumer Electronics > Warmer Appliance > Heater Fan
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile























9.5mmx140mm 230V 300W Stainless Steel 316 Sheath Cartridge Heaters
20x300mm 220V 1200W Tube Mold Cartridge Heater Heating
2020 Year Electric Hot Water Tubular Heater Immersion Heating Element New Products
Customized High Quality High Temperature Resistance Cartridge Heater for Injection Molding Machine
Customized High Quality High Temperature Resistance Long Working Life Heat Rod Tubular Heater
Industrial Water Heater Elements With Pipe 10mm
Stainless Steel 304 W U I Type Electric Finned Flexible Tubular Air Heater
OEM Stainless Steel Water Boiler Flange Immersion Electric Oil Heating Element
2kw 3kw 5kw 6kw Immersion Tubular Heater
Custom High Quality Stainless Steel Electric Factory Heating Elements
Alumina Ceramic Ignition Pin Needle Ceramic Igniter