Product Application

Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :
Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves, pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.

3400w Heat Gun/Air Heater/Hot Air Blower.

Main Features

1)We use photocell to control temperature inside, once the handle inside is above 135°C, the whole circuit will be cut off;
2)PA66 for welder body, plastic resist 280°C;
3)Japanese bearing and thermal insulation gasket;
4)Swedish heating wire;
5)Ceramic material resist 1650°C;
6)Airflow is 300L/min, max temperature is 650°C.

3400w Heat Gun/Air Heater/Hot Air Blower.

WARRANTY CERTIFICATE

HEATFOUNDER offer 1 years warranty (from the date of shipping) for the 3400w Heat Gun/Air Heater/Hot Air Blower. And will replace the failed welders due to a defective design and production during the warranties.
For other matters:
Defects or damages resulting from any improper installation and using are not covered under the WARRANTY.
Besides, we are also not responsible in the below cases:
 Damaged during the transportation
 Damaged during the natural disasters

A: WHAT WE CAN DO IF THE WELDER IS FAILED DURING THE WARRANTIES?

Q: We will try to help repairing the tools first, if the welder can not repaired or not worth to repair, we will offer new welders to replace whole set.