New generation pet bottle manufacturing plant

    Configuration of new generation pet bottle manufacturing plant

1.Minimize distance of heating heats:

Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven, it saves more than 30% electricity consumption.

2.Modularized design conception

  Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts

3.Efficient and soft perform inlet system

By rotary and soft preform inlet system, the speed of preform feeding is ensured meanwhile, the preform neck is well protected.

4.Servo driving and cam linking blowing section:

The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement, equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.

1. Exploded bottles rejection unit

During the blowing process, if the bottle bursts, bad bottles can be automatically removed. This prevents the bad bottles from entering the filling machine.

2. High pressure air recovery Unit

After the water bottle blowing, high pressure air can be recycled and used again for the pre-blowing and machine physical movement.

3. Oven and preform temperature detection unit

Thermal sensing unit detects temperature in oven and temperature of heated performs. When the temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.

1. Stand-by engineers team to provide overseas installation and commissioning service. 
2 1 year warranty. During warranty, we provide free of charge for repairing cost.
3. Lifetime maintenance. After-sales department can provide life long maintenance service.

We can also supply: