RobotLinking Development board CH340G UNO R3 Atmega328p with USB cable

FOB Price

Negotiable / Piece

1 Piece(Min. Order)

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

RobotLinking Development board CH340G UNO R3 Atmega328p with USB cable

The Uno R3 with Cable is a micro-controller board base on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. 
It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. 

“Uno” means one in Italian and is the name to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.
Note: The Uno R3 reference design can use an Atmega8, 168, or 328, Current models use an ATmega328, but an Atmega8 is shown in the schematic for reference. The pin configuration is identical on all three processors.

Features:

- 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Ardunio Due that operates with 3.3V. The second one is a not connected pin, that is the reserve for future purposes. 
- Stronger RESET circuit. 
- Atmega 16U2 replace the 8U2

Packing list:

1 x RobotLinking Development board CH340G UNO R3 Atmega328p1 x USB cable

Contact Us for More Information

Product Paramenters

Model Type	UNO Rev R3
Microcontroller Chip	ATmega328
Operating Voltage	5 V
Input Voltage(Recommended)	7-12V
Input Voltage (limit)	6-20V
Analog I/O Pins	6
Digital I/O Pins	14 (of which 6 provide PWM output)
PWM Digital I/O Pins	6
DC Current per I/O Pin	40 mA
DC Current for 3.3V Pin	50 mA
Clock Speed	16 MHz
SRAM	2 KB (ATmega328)
EEPROM	1 KB (ATmega328)
Flash Memory	32 KB (ATmega328) of which 0.5 KB used by bootloader
On Board LEDs	On/Off, L (PIN 13), TX, RX
Dimensions	755412mm
Weight	64g

Details Images

Contact Us for More Information

Contact Us

Yiwu kunchang e-commerce firm: Contact nameLINDA
Chat Now

*Email
Please enter Your valid email address.
*To

LINDA
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

PLC,DCS (SIEMENS.Mitsubishi.AB,Delta.etc)	sensor	Motor Driver	Circuit breaker
Inverters & Converters	Brand Relay	Instruments & meters	Contactor
Module + Board & EVB	Honeywell	Communication & Networking Modules	Development Boards and Kits
electronic component	Diagnostic Tools	Electrical Equipment & Supplies	Adapters
Inductors	Resonators	Capacitors	Encoder
Testing Instrument & Equipment	FESTO	Mechanical Parts	pump
Bently Nevada

RobotLinking Development board CH340G UNO R3 Atmega328p with USB cable

You May Like

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category

Product Tags: