pp melt blown spunbond nonwoven fabric machine pp melt blown non woven fabric making machine melt blown fabric machine nonwoven

Production line of fully automatic melting and spraying machine

1: polymer feed

This equipment is equipped with automatic vacuum suction feeding device. Generally, the polymer is made into small spherical and granular slices. When the vacuum device is opened, the raw materials can be fed into the hopper equipped with the extruder.in

If the material in the hopper is low, please fill it up immediately. Otherwise, the material will be broken and the melt spray cloth will become thin or not mesh. 

2: molten extrusion

At the feeding end of the screw extruder, the polymer slice shall be mixed with the necessary raw materials such as additives. After mixing, the polymer slice shall enter the screw extruder and be heated to melt. Pay attention to the heating temperature

According to the characteristics of the raw material to be adjusted, can be in accordance with the manufacturer's recommended parameter Settings, can also be adjusted in accordance with the actual production requirements, so that the finished products to meet the use requirements. 

3: fiber formation

The filtered clean melt should pass through the filter screen and then be evenly fed into the spinneret to make the extrusion amount of each spinneret consistent

When the volume, need to stop the machine to check whether there is a fault, check whether the filter screen is blocked, timely troubleshooting problems, so as not to damage the extrusion equipment.When eliminating extruder problems, check

The filter plate of the spinneret can observe whether the holes in the filter plate have impurities that cannot flow normally.The fibers are pulled out of the melt by the crosswind, the spinnerets are squeezed out of the glue, and then cooled.

4: electrostatic electret

After the net through the electrostatic device, so that the melt - spraying non - woven fabric with static electricity.PM2.5 particles and other isolation mainly through two ways: mechanical blocking and electrostatic adsorption.Among them, mechanical block main

It is to use the small pores of the filter material of mask fiber to block the invasion of bacteria and viruses, but this mechanical blocking effect is very bad for the filtration effect of particles with particle size less than 1 m, so it cannot work

To urification.Therefore, in order to improve the filtration efficiency of the mask, the electrostatic adsorption capacity of the mask can be increased.And increase the capacity of mask electrostatic adsorption, the need to melt spray non - spinning

Cloth filter material for electret treatment.After electret treatment, the surface of the fiber will be charged with a large amount of static electricity 

Add breathing resistance.

6: slitting and winding

There is rewinding equipment at the end of the production line.The fusion-sprayed non-woven fabric is cut and rolled up to the size required for packaging.Winding has tension control device, so that the winding material is always stable

Volume status.Before the rewinding is equipped with a cutting knife, which can remove the edge material, so that the packaging specifications for packaging, of course, can also be cut into the size of the product production, the distance between the cutting knife is non-woven

The width of the finished product, this distance can be adjusted, according to the production needs to adjust and arrange the number of cutting knives

Company

Contact Us

Dongguan Huanlian Automation Equipment Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Dongguan Huanlian Automation Equipment Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now

Product Categories

Apparel Folding Packing Machine	Customized Labeler	Filling Line	food packaging machinery
Mask Machine	Mask mechanical parts	N95 mask machine	N95 sponge sticking machine
Production Line	Spare Parts	Standard Labeler	straws machine
Ungrouped

More

New Products

• n95 anti pollution mask making machine 1- n95 face mask body making machine mask making manual machine
• n95 face mask making machine fully automatic medical face mask machine mask manufacturing machine
• n95 nonwoven surgical mask machine medical mask manufacturing machine machine medical mask
• n95 surgical mask packing machine face mask production machine sergical mask making machine
• n95 face mask welding machine mask blank making machine mask machine disposable face
• nonwoven mask earloop welding machine mask earloop spot welding machine mask outside earloop welding machine

• ultrasonic welding machine earloop auto earloop welding machine semi manual earloop welding machine
• earloop welding machine dust earloop welding machine semi automatic ultrasonic earloop welding machine
• earloop welding machine. ultrasonic earloop welding machine facemask earloop welding machine
• earloop welding machine face mask earloop welding machine mask earloop welding machine
• making machine mask machine for medical mask blank mask machine
• protective mask machine mask sewing machine face-mask-machine

• ear-loop mask machine ultrasonic face mask welding machine face-mask-making-machine
• non woven mask machine medical face mask making machine disposable mask making machine
• face mask packing machine face mask maker machine face mask making machine disposable surgical
• face mask disposable machine non woven face mask machine mask machine korea
• mask maker machine full automatic face mask machine nose mask machine
• face medical mask machine non woven mask making machine automatic mask making machine

• 3 ply face mask making machine face mask 3 ply machine machine make mask
• machine face mask machine for making face mask mouth mask machine
• face mask making machine surgical mask making machine dust mask making machine
• Factory Mask Machine Surgical Face Mask Making Machine
• Factory 20khz transducer plastic generator Horn for the nonwoven fabric mask ultrasonic welding machine
• Factory 20khz ultrasonic welding machine transducer plastic generator Horn for the nonwoven fabric mask welding machine

Popular Searches

• textile equipment
• Face Mask Making Machine
• Cover Making Machine
• delinter
• Fabric Recycling Machine
• Cotton Opener Machine Pp Fiber
• Carding Machine
• Felting Machinery
• mattress production line
• polyester staple fiber line
• bonding wadding machine
• polyester wadding production line
• nonwoven machine
• Needle Punching Machine
• Nonwoven Carding Machine
• Coconut Fiber
• Nonwoven Fabric Making Machine
• jute fiber
• Tearing Machine
• Spare Parts Machine
• Quilt Machine
• Fiber Opening Machine
• cloth line
• Mask Making Machine
• cover machine
• disposable shoe cover machine
• shoe cover making machine
• slippers & sandals
• Nonwoven Machinery
• nonwoven production line

Recommended Products

• Full Servo Automatic Wet Wipe Machine
• Full Automatic Menstrual Pants Production Line Disposal Menstrual Pad Making Machine from Fujian
• Welldone Hot Sale T Shape Full Servo Automatic Baby Diaper Machine
• Customized Manufacture Full Servo Two Pieces Pull Up Machine
• Automatic Sanitary Napkin Machine Woman Sanitary Napkins Lady Pad Making Machine
• Welldone Hot Sale T Shape Full Servo Automatic Baby Diaper Machine
• Hygiene Equipment Elder Nursing Care Pad Underpad Manufacturing Machine
• Full Servo Automatic pull up Adult Diapers making machine For Manufacturing adult diaper pants production line
• Semi Servo Disposal Baby Diaper Making Machine Prix In China
• Full Servo Menstrual Pants Production Line Disposal Menstrual Pad Making Machine
• Full automatic Baby Diaper packaging machine Full automatic diaper packing machine
• Adhesive Glue Machine For Baby Diaper Machine Production Usage

More

Find Similar Products By Category

Manufacturing & Processing Machinery > Textile Machinery & Parts > Nonwoven Machine