48-B0192 Skid resistance and friction tester

STANDARD: EN 13036-4(ALSO CONFORMING TO EN 1097-8, ASTM E103)

Used for the measurement of surface friction properties, suitable for both site and laboratory applications and for
Polished Stone Value tests using curved specimens from
accelerated polishing tests.

Introduction

    The Pendulum Skid Tester measures the frictional resistance between a rubber slider mounted on the end of a pendulum arm and the test surface. This provides highway engineers with a routine method of checking the resistance of wet and dry surfaces to slipping and skidding, both in the lab and on site.
    It is based on the Izod principle: a pendulum rotates about a spindle attached to a vertical pillar. At the end of the tubular arm a head of known mass is fi tted with a rubber slider.
    The pendulum is released from a horizontal position so that it strikes the sample surface with a constant velocity. The distance travelled by the head after striking the sample is determined by the friction of the sample surface.
    A reading of Skid Resistance is obtained.

Features

• Designed for laboratory and in situ road surface testing
• Dispatched calibrated to EN1097-8
• Low friction arm, and lightweight pointer
• Comes with integral ‘F’ scale for use with small slider set for 76mm slide length. (PSV test)
• Repeatable and reproducible
• Supplied with robust carrying case

Applications

• Road surface testing
• Testing of new road surface materials under development
• Testing of aggregates in the PSV (polished stone value) test
• Testing of fl oors and pedestrian walkways
• Flooring materials product development
• Accident investigations, both traffi c and pedestrian
• Litigation investigations

Packing

Carrying case: flight case

Packing dimension: 790x780x500mm

Weight approx.: 50kg

Delivery

Delivery time: within 3 days after payment

Standard delivery

48-B0192 Portable skid resistance and friction tester, adjustable in height
B0192/1 Sturdy case with dense foam inserts giving excellent protection
B0192/2 F’ Scale Built in, for use with small slider set for 76mm slide length. (PSV test)
B0192/3 Perspex setting gauge 126 mm
B0192/4 TRRL3.0, Slider 55 Road surfaces, Customer can choose either type.
B0192/5 Brush, For removing unwanted dirt or grit from area to be tested
B0192/6 C Spanner, For attaching and releasing arm to rotating head
B0192/7 17mm Spanner For fi tting rear foot
B0192/8 Water spray bottle, For wetting surface to be tested
B0192/9 Feet pads, For placing under levelling feet when on soft ground
B0192/10 Operating instructions, A guide to road, floor and PSV testing
B0192/11 Tool set
B0192/12 Calibration Certifi cate Despatched
OPTIONS: need to be ordered seperately
B0192/13 Metal base plate without fixing device
B0192/14 TRRL 1.250, Slider 55 PSV Test
B0192/15 FOUR S, Slider 96 Internal Floors
B0192/16 Fixing device to base for blocks and nature stones(EN1341,1342)
B0192/17 Fixing device to base for laboratory polished test