DS-60 Digital Display calibrator test equipment Calibration machine equipment universal testing machine

DS-60 Calibration machine for universal testing machine .for compression testing machine

Product Description

DS60 precision digital measuring instrument that is a kind of force value (Torque) instrument

with high precision and high reliability. After years of development, many types of instruments can use for precision measurement of force value, Adjustment and testing of sensors, performance testing of material, measurement of Stress-strain, measurement of transient peak value etc.

Main feature

Synchronization digital ratio A/D conversion technology provide ultra-high resolution ratio and accuracy, display indexing is between of 100 thousands to 500 thousands mV/V, resolution ratio of signal is 0.01 μV/V. A/D conversion rate is 50-100 times per second. Accuracy <0.005%FS ( repeatability and linearity).

Synchronous digital ratio technology, for the bridge voltage of sensors and output signal process A/D conversion via standard voltage source at the same time. Adopting digital method to get measurements data, thus substantially reducing the instrument's drift

The range of input signal can be selected via program, applied to the Various types of strain sensor which output sensitivity will be 1mV/V, 2mV/V, 3mV/V, 4mV/V. measurement range of signal and input polarity can be set by software for each data channel in instruments.

Separate ground wire and symmetrical bridge circuit, that configuration greatly improved security for instrument and sensors in the state of surge current and lightning strike.

Ultra-wide adjustment range for zero-bit, the adjustment range can be set -150%-150%, especially for small dynamic load measurement in large static loads.

Unique signal slope control technology, effectively suppress electromagnetic interference (EMI)

7 linearity correction capabilities, improve the system of measurement accuracy.

That can be stored and called calibration data form 9 different range sensors.

Two ways for calibration including Sensor zero calibration, the system loading calibration, sensitivity, input calibration

High-precision data recovery and transplantation, when needed that can be restored or will be moved calibration data to another instrument(That if they inadvertently keep the calibration data will be required to remove or instrument failure), So as to avoid re-calibration.

Multiunit conversion, including N (Newton), kgf (kilograms force), and bf (pounds force),and the sensitivity of measured value (mV / V) for sensor’s output signal.

Fast peak measurement and retention, the hold time of peak value can be set by software.Independent hardware detection circuit, that can be fully guarantee the reliable work of instrument.

Equiped serial port and strandard RS232 interface that can be connected to the printer or a computer (optional).

CTM & UTM

Contact Us

Nanjing T-Bota Scietech Instruments & Equipment Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Nanjing T-Bota Scietech Instruments & Equipment Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now

Product Categories

NDT testing	Ungrouped	Surveying Instrument	Soil testing
Rubber and plastic testing	Rock and aggregate	Railway testing	Petroleum testing
Pavement testing	Asphalt / bitumen Testing	Material testing machine	Geotextile testing
Geological Testing Machine	General Laboratory testing	Environment testing	Concrete testing machine
Ceramics testing	Cement testing machine

More

New Products

• 2000kN Compression Strength Determination Of Cement Concrete And Rock Compression Testing Machine
• TBT 220V 2000kN for strength tests on concrete cubes Automatic Concrete Electro Hydraulic Compression Testing Machine
• 1000KN Testing steel reinforcing bars Universal Material Tensile Testing Machine
• TBTUTM-1000B 1000kN Digital Display Hydraulic Universal Testing Machine
• STEEL TRACTOR Hydraulic 1000kN Digital Display Hydraulic Universal Testing Machine
• Tensile Compression bending Universal Testing Machine with PC display

• TBTCTM-2000ASI Automatic Material Electro Hydraulic Compression Testing Machine with PC and Servo Control(All-in-one PC)
• 220V 2000KN Digital display with printer Compression Testing Machine
• TBTSCIETECH ASTM D412 5KN Electronic Manufacturer Price Used Plastic Rubber Universal Tensile Testing Machine
• T-BOTA 600kN/1000kN Digital Display Hydraulic Universal Testing Machine
• TBTUTM-1000CSI Servo Controlled Universal Testing Machine for tensile bending compression to metal and non-metal materials
• 2000kN Digital Electro Hydraulic Compression Testing Machine with printer

• 220V 2000kN Material testing Digital Hydraulic Tensile Concrete Compression Testing Machine
• (TYA-300A) PC Control Digital Automatic Compression Testing Machine
• T-BOTA 1000KN 2000KN Digital Display Hydraulic with Printer CTM Compression Testing Machine
• 2000KN T-BOTA Digital Display in screw large Vertical space Hydraulic CTM Compression Testing Machine
• T-BOTA TBTCTM-300AS 300KN Control Infrastructure Hydraulic Cement Compression and flexural Test Machine
• T-BOTA compressive machine press machine General purpose 2000kN with Digital Readout Compression Machine

• T-BOTA Digital Display LCD Reinforced Concrete Drainage Pipes Compression Testing Machine
• With PC and servo control Hydraulic Concrete Compression /compressive/ pressure Testing Machine
• Computer Controlled Electro-hydraulic Servo automatic Compression Testing Machine
• T-BOTA Brick Automatic Compression Testing Machine with PC Contro and Auto Loading
• T- Bota 100 kN/ 300 kN Cement compressive strength and flexural strength Testing Machine with Digital Display
• Compression machine CTM 2000kN Electro hydraulic Digital display building materials Concrete Compression Testing Machine

Popular Searches

• digital tester
• Resistance Tester
• electrical instrument
• test instrument
• lab equipment
• analysis instrument
• laboratory instrument
• Asphalt Mixture Mixer
• launch x431 master
• x431
• Gloss Meter
• Resistance Meter
• digital instrument
• dc load bank
• testing equipment
• testing machine
• battery load bank
• Circuit Tester
• Impact Tester
• lab instrument
• weather station
• gps receiver
• laboratory instruments
• test equipment
• laboratory equipment
• electronic timer
• electronic meter
• electronic instrument
• Electricity Meter
• data collector

Recommended Products

• paint and metal cupping tester for export
• ISO 1520 cupping index tester supplier ISO 20482 cupping depth tester manufacturer
• dual standard cupping testing machine ISO 1520 ISO 20482 universal cupping tester for coating and metal standards
• EN ISO 1520 compliant cupping test machine cupping tester for ISO 1520 and ISO 20482
• JIS K 5600-5-1 cupping test machine EN ISO 1520 cupping tester EN standard coating flexibility tester
• ASTM coating deformation tester paint flexibility testing equipment JIS K 5600
• DIN 53166 compliant cupping tester ASTM cupping tester ASTM D4175 cupping test machine
• ISO 20482 formability test machine DIN 53166 cupping tester paint film cupping testing machine
• ISO 20482 ductility testing machine Erichsen cupping test equipment metallic materials cupping tester
• ISO 1520 compliant cupping testing machine ISO 20482 metal cupping tester sheet metal cupping test machine
• ISO 1520 lacquer cupping test equipment standard paint film deformation tester paints and varnishes cupping tester
• ISO 1520 cupping tester paint cupping test machine coating flexibility tester

More

Find Similar Products By Category

Instruments & Meters > Test Instrument > Test Machine