High temperature Carbon black content meter IEC 60811-4-1 ISO 6964

It is suitable for the determination of carbon black content in polyethylene, polypropylene, and polybutene plastics. The test of carbon black is obtained by the gravimetric analysis of the sample under the protection of nitrogen after high temperature decomposition. Features easy using, simple operation, accurate measurement, high precision, and high degree of automation.

Standards

GB/T 13021-1991 Determination of carbon black content of polyethylene pipes and fittings (thermal weight loss method)

ISO 6964-1986 Polyolefin pipes and fittings. Determination of carbon black content by roasting and pyrolysis. Test methods and basic specifications

GB/T2951.41-2008/IEC60811-4-1 Cable and optical cable insulation and sheathing materials general test methods Part 41

JTG E50 T1165 Geosynthetics Test Regulations Carbon Black Content Test (thermal weight loss method)

Test principle

Weigh a certain amount of the sample to be tested with an analytical balance, place the sample in a carbon black content tester, heat it to a certain temperature under the protection of nitrogen, and pyrolyze at a constant temperature for about 45 minutes, and then weigh the pyrolysis product Weight; heat the pyrolyzed product to 900±50℃ for calcination with oxygen; calculate the carbon black content in the sample according to the mass difference before and after pyrolysis and calcination.

Features

Nice appearance, compact structure, easy operation

Opening type furnace door convenient for placing the sample and determining the best position of the sample;

High degree of automation, only need to set the temperature value and heating time, the instrument will automatically rise to the set value;

High temperature control accuracy, large temperature range, high furnace temperature uniformity;

Excellent constant temperature control function, and can set the constant temperature time, with high constant temperature accuracy;

Can set 30 groups of different heating time periods, which can have different heating temperatures, heating rates, constant temperature time, etc.;

Comprehensive parameter displayed, showing the number of set groups, theoretical temperature, actual temperature, heating time or constant temperature time;

Set parameters and the time of heating or constant temperature during the operation are real time displayed

Technical specifications

Furnace size: ￠50mm×450mm

Heating element Resistance wire

Length of heating zone: 200mm

Length of constant temperature zone: 100mm

temperature range:<1100℃

Maximum temperature: 1200°C

Temperature control: Intelligent 30-segment programmable

Constant temperature accuracy: ±1℃

Furnace door result: Open

Power supply: AC220V 50HZ

Power: 1.2KW

Dimensions: 340×300×390mm