CR3 Common Rail Injector stroke measuring tools

CR3  Common Rail Injector stroke measuring system, which includes almost all common rail injectors stroke measuring standard data inside. Suitable for BOSCH, CAT, DENSO, DELPHI, SIEMENS injectors and so on .

It can test:

1. Adjust Needle Lift
2. Adjust Needle Opening Pressure
3. Adjust Total Lift of Armature Assembly
4. Adjust Actual Lift of Armature Assembly
5. Adjust Solenoid Air Gap
6. Adjust Solenoid Spring Compression
7. Driving Armature

Common Rail Injector Repair Stage 3 Rebuild Injector after Component Being Replaced:

Injector Critical dimensions are accurately controlled by using the calibration shims or spacers of exact thicknesses in the injector during injector rebuild to meet Bosch spec tolerance of 1um.

CR3  Common Rail Injector stroke measuring tools

1:Intuitive, step-by-step instruction to direct user to rebuild injector

Measure thickness of calibration shims

Measure dimension of injector components

Provide the required thickness of calibration shims

2:Complete database to cover Bosch common rail injectors

CRI 1, CRI 2, CRI 3 for Automotive engine

CRIN 1, CRIN 2 for Commercial vehicle engine