Long-term marketing of quality products wear - resistant elbow

90 - degree Angle, wear-resisting ceramic composite wear-resistant elbow, straight pipe, ceramic wear-resisting ceramics tiles wear-resisting pipe, since the tendril burning ceramic wear-resistant wear-resistant elbow bend manufacturer is to use a special heat-resistant super glue paste special corundum wear-resisting ceramic chip inside the elbow, to solve the thermal power, metallurgy, steel, cement and other industries of transporting elbow worn-out problem, at the same time using steel elbow and wear-resisting ceramics piece of paste, a comprehensive solution to facilitate quick change and construction. According to the different working conditions, the production process is also different, can use the direct paste method, bolt clamping method or one body forming method. The RHS method uses selected alumina particles to fire the inner lining pipe by various forming methods, and then pours the inner lining pipe by special filling material. The pipe formed by this method is different from the ceramic composite pipe formed by the arcuaric technology. The lining of the ceramic crystal is the same as that of the patch ceramic. Its advantage is that the inner wall of the pipe is smooth, with very good wear resistance, suitable for conveying slag and ash removal system with high requirements on the pipe material.

The bolt clamping method is a ceramic assembly method which uses adhesive bonding, ceramic pieces interpressed and interinserted, and the bolt clamping method is threefold fixed. Because of the triple fixation method, ceramics and equipment have become one, even in the high temperature operation of more than 1000, ceramics will not fall off.