SIEMENS 1LE0003 2.2kw 2p electric Motor

1LE0 motors rated output powers means that the motor runs under continuous duty S1 (IEC 60034-1) operation when operated at ambient temperature from -20 ℃ to 40 ℃ and at altitudes of up to 1000 m over sea.

IEC 60034-1 differentiates between Category A (combination of voltage deviation ±5% and frequency deviation ±2%) and Category B (combination of voltage deviation ±10% and frenquency deviation +3% / -5%) for voltage and frequency fluctuations. The motors can supply their rated torque in both Category A and B. In Category A, the temperature rise is approximately 10 K higher than during normal operation.

1) Order No. supplement Z with option code when ordering;
2) Without additional charge
3) For FS80 ~ 112 motor, R10 only in combination with Option code H08 (Connection box on NDE) possible.
4) Cable entry on connection box towards the non-drive end.
5) For vertical mounting of FS250~FS355 motor, please specially consult with Siemens.
6) FS280, FS315 and FS355 motor with the regrease device as standard.
7) For horizontal mounting motor, insulated bearing located at DE; For vertical mounting motor, insulated bearing located at NDE.
8) Not possible in combination with canopy or separately driven fan (Order code: F70).
9) Second standard shaft extension on NDE has allowed output from the next smaller frame size.
10) Only applicable for the construction type IM V5, IM V1, IM V15 and IM V18. Not possible in combination with Option code L05.
11) Applicable to motor of horizontal mounting. If vertical mounting motor required to be with condensation drainage holes, please inquiry Siemens specially. If condensation drainage holes are required, it is necessary to order the motors in their respective type of construction.
12) When the separately driven fan is mounted, the length of the motor increase by ∆L. For an explanation of the additional dimension and technical data see from page 8.
13) Without fan and fan cover, the length of the motor is decrease by ∆l. By using the power output of rating plate, the motor must have external cooling by air flow. The correct motor cooling is in responsibility of customer. Missing or wrong cooling reduce the life time or damaged the motor.
14) When SINAMICS inverter is connected with Omron encoder (E6B2- CWZ6C), additional configuration on inverter is needed. For detailed information, please contact with Siemens hotline.
15) Omron encoder (E6B2-CWZ1X) can be directly connected with SINAMICS inverter.
16) Recommended for indoor or outdoor installations exposed to direct weather conditions. Industrial environment with moderate SO2, inshore maritime climate but not offshore.
17) Not applicable for 1LE0 Al motors