HF 50ton Digital push pull Dynamometers / Push and Pull Tester/meter / push pull gauge

push pull dynamometer

HF 50ton Digital Dynamometers / Push and Pull Tester/meter / push pull gauge

Description:

The force gauge has advantages of high precision, easy operation and carry. What's more, it has kinds of testing modes, convenience for conner and it can store and input data to computer for statistical analysis as well as constitutes testers with different functions, combination with test-beds and clamp. Users can input local acceleration of gravity value to make test more precise.

Main Specs:

Functional characteristics:

1. High precision and high resolution.

2. Five testing modes and three display methods for selection--enhancetesting efficiency to the maximum extent.

3. N (Newton), kg (Kilogram) and lb (Pound) three measuring units for selection and conversion.

4. Setting function of gravity acceleration

5. Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.

6.Automatic peak function.

7.Max and min and comparison value can be set for statistic analysis. The buzzer will alarm if exceeding comparison value.

8. Data storage function. 896 testing values can be stored.

9. Data output function. The data can be input into computer through data line for various analyses.

10. Environmental protection. The device will automatically stop if no operation within 10 minutes.

11. High quality chargeable power supply. The charging voltage is avai-lable from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.

12. 2 sets mounting dimensions, it is applied for most testing platforms domestically and easy for users to install it to platform.

13. Special testing function of make-break ability of switch contact to make the make

break testing be more accurate.

14. 6 digits large screen display.

15. Synchronous measuring softwarecan connect computer measuring, the computer display measuring graph and the detailed testing records,and can preserve, print ,make analysis,input speed, area, displacement, pressure. ( chosen functiondetails see CD data )

16. Contact control signal outputsetting comparative value,when the Measuring value is over comparative value, output signal control circuit Breaker's make-and break, thus realize the function of stop electromotor, And control automatically; it is also can be used for realize other control Functions, for example input signal to plc to realize automatization. Also it can set signal output mode, for example output signal at some Measuring range. There is a jack on the side of apparatus can put one Side of connection line to secondary jack, and the other side in the jack On the testing machine which is produced by our company, thus it can

realize function of stop electromotor automatically when the measuringValue is over comparative value. The comparative value can set by himself.

17. Negative phototropism functionuse key-press or apparatus is stressed,the negative photo tropism would light automatically, it will close negative phototropism if 10s non-operation; it also can press "setting" key 6 times ,enter 'light" condition, choose "NO" to close negative phototropism, chose "YES" to start the function automatically.

18. LCD overturn display press "print" key can make the value reverse 180°,convenience for looking the measuring value from different angle.

Different Models Force Gauge: