TOKIMEC relief valve TCG50-06-FEV-U7-H-S10-K hydraulic valve

FOB Price

USD $100 - $101 / Set

1 Set(Min.Order)

Port Any port
Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	TOKIMEC		Place of Origin	Japan
Pressure	High Pressure

Product Description

Overflow exhaust: In order to carry out stable pressure control, be sure to loosen the exhaust plug and make the air clean during the initial adjustment. Manual adjustment: When the initial adjustment or electrical faults cause no input current in the solenoid valve, the manual pressure adjustment knob can be operated to set the pressure. For electromagnetic control, please turn the knob to the left limit position before use. Minimum control flow rate: When the flow rate is relatively small, the set pressure may be unstable. Therefore, the flow rate must be greater than the value shown in the table below. Drain piping: The allowable back pressure at Y port (drain) is 0.2MPa. Please return the oil drain pipe directly to the tank, and the end of the oil pipe must be arranged below the oil level. Fuel tank piping: Please do not connect with other fuel tank piping, but directly connect to the fuel tank. Also, the end of the piping must be placed below the oil level. Discharge piping: If the distance of the discharge oil piping is too long, the internal volume of the pipeline will increase and the pressure control will become unstable. So pay more attention. Zero adjustment: It has been adjusted before leaving the factory, so there is no need to adjust again. Set pressure of main valve: The main valve acts as a safety valve, and the pressure is set to be 2.5 MPa higher than the maximum adjustment pressure (the flow rate at the time of setting is 1/2 of the maximum flow rate). When the relief valve is installed on the sub-plate, drain the oil from the Y port (Rc1/4) of the main valve cover.

Technical Parameters

Model	TCG50-06-FEV-U7-H-S10-K
brand	TOKIMEC
weight	2.5KG

Related products

Product display

Packing&Shipping

In order to ensure that the product is not damaged during transportation, we will choose to use high-hardness cardboard boxes or wooden boxes to package the product according to the volume of the product, and adopt protective measures such as foamanti-collision and wooden frame fixing to ensure the safe and non-destructive delivery of the goods to the greatest extent.

Company Introduction

Service providers in the industrial sector

Contacts: Marie Cheung

Telephone: +8613729884993 (Wechat Synchronization)

E-mail: marketing@szouhang.com

Zip:518125
Address:Buildings 32,Third industrial zone, houting,Shajing,Bao'an District,

Shenzhen, China (Mainland)

Contact Us

Shenzhen Ou Hang Fluid Power Co., Ltd.

*Email
Please enter Your valid email address.
*To

Shenzhen Ou Hang Fluid Power Co., Ltd.
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Has been removed	Hydraulic motor	Hydraulic pump	Injection molding machine and parts
Proportional servo valve	Servo energy saving pump	Ungrouped

TOKIMEC relief valve TCG50-06-FEV-U7-H-S10-K hydraulic valve

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category