BEACON crdi injector tester common rail injector tester CR2000

Briefing

CR2000 high-pressure common rail injector controller is to imitate the engine ECU (Engine Control Unit), while providing Bosch, Denso, Delphi and other common rail system control signals, driven high pressure common rail pump and high pressure common rail injector To work, drive signal parameters Users can set according to their actual situation, and can be grouped to save, easy maintenance personnel on the high-pressure common rail system to determine the status of work and maintenance.

1.2About safety

To ensure safe operation, follow these rules:
1.in the operation of the control process, the operator should wear safety glasses;
2. the use of independent special socket and reliable grounding. The power cord of the controller is a three-wire plug, connected with the standard three-wire socket, please ensure reliable grounding;
3. if the power supply voltage is unstable, the controller should be connected to the power regulator to use;
4. regularly check the AC power cord is damaged, and the power plug or power outlet with or without dust accumulation;
5. if the controller is abnormal, or issued an unusual sound or smell, or the controller can not be hot to touch, please immediately stop using, and the power outlet unplug the AC power cord plug and all other cable;
6.if the controller is faulty, please contact after-sales service personnel to obtain the necessary help;

use and maintenance

1.do not throw, drop or trample the control device, to avoid the control device by a strong external impact;
2. do not insert foreign objects into the connector part of the controller;
3. do not water or other liquid into the controller inside or control device;
4. do not touch the AC power cord terminal with wet hands;
5. Do not allow dust or foreign matter to accumulate around the terminals of the AC power source. Dust and foreign matter deposited on the AC terminals may cause fire or electric shock.
6. please avoid stepping on or squeezing the AC power cord;
7. unplug the power cord when cleaning the controller.