- Jiangsu Acrel Electrical Manufacturing CO.,LTD
-
Wuxi, Jiangsu, China
- Main products: power sensor, programmable power meter, DC power analyzer, Data center monitor device, Din rail energy meter, Isolated power supply, wireless temperature sensor , IOT?energy?meter , split core current transformer
Home > Products > DC Power Meter > Acrel AGF-M4T PV digital meter 8 string combiner box for solar panels
Acrel AGF-M4T PV digital meter 8 string combiner box for solar panels
USD $104 - $104
/ Piece
1 Piece(Min.Order)
- 1000 Piece / Pieces per Month
- T/T Credit Card
You May Like
-
Acrel AGF-M4T panel sqauare meter for solar power combiner box 10 input 2 output
-
ASL100-SD2/16 Acrel 300286.SZ dimming of LED lights 0-10V dimming driver
-
ASL100-SD2/16 Acrel 300286.SZ low voltage halogen lamps 0-10V dimming driver
-
ASL100-SD2/16 Acrel 300286.SZ centralized control 0-10V dimming driver
-
ASL100-SD4/16 Acrel 300286.SZ lighting manual control system 0-10V dimming driver
-
Acrel ASL100-SD4/16 schools lighting control system 0-10V dimming driver/ KNX switch actuator
Product Details
| Brand Name | ACREL | Place of Origin | Jiangsu, China | |
| Model Number | AGF | Operating Temperature | -25~60 | |
| Dimensions | 72*87 | Measuring Voltage Range | 0~1000V | |
| Measuring Current Range | 0-9999A | Accuracy Class | 1 |
Product Description
Product Description
AGF-T Perforation type PV confluence acquisition device
1 General
AGF-T Perforation type PV confluence acquisition device is specially designed for smart PV combiner box. It is used for monitoring the running state of solar panels in solar cell arrays, measuring the currents of solar cell, detecting the state of surge protection devices and DC breaker. The device is equipped with RS485(Modbus) communication port for transmitting all the datas to master device.
2 Product Naming
*Power supply filter module is only optional when there is filtering requirements to power supply
3 Characteristics
Primary current is connected in through perforation. Easy installation, high safety
With Hall sensor, the max isolation measuring current 20A
Voltage measurement range for Bus bar is up to DC1kV
LED display, fit for checking and testing operation in wide-temperature or outside environment.
With the function of inner temperature measurement for real-time measurement of the inner temperature of combiner box
With RS485 Modbus RTU
More options of power supply
Compatible with din rail installation and baseboard fixation installation, small dimension saving more box space.
DC Bus bar voltage input circuit with built-in DC 1kV fuse
4 Product function
Photovoltaic cell open circuit alarm to cooperate with group string voltage and judge Comprehensively
With 3-channel switching state monitoring to collect output idle contact information of DC breaker ,lightning protector. protector etc
Option RS485 port, Modbus-RTU protocol; programmable slave address, baud rate, data format
English LCD display,convenient to set parameters and check the data
5 Technical Parameters
6 Outline and installation
6.1 Outline dimension
6.1.1 Power supply module and power supply filtering module size(Figure 1)
Note: Imaginary line is the fixing size of the bottom plate
As power supply module is heavy, bottom plate is needed in installation to avoid its coming off during transportation.
6.1.2 The extension module mounting dimensions (Figure 2)
Note: Imaginary line is the fixing size for base plate.
6.1.3 Confluence acquisition module installation dimension
8-channel confluence acquisition module installation dimension(Figure 3)
4-channel confluence acquisition module installation dimension(Figure 4)
Configuration of 8-channel or 4-channel confluence acquisition module will be decided by actual needs: when 4 channels or less are needed, 4-channel confluence acquisition module will be installed, when needed channel number is 5 to 8, 8-channel confluence acquisition module will be installed. When needed channel number is more than 8, then the number will be divided by 8. If there is a remainder in the result and the remainder is less than 4, then 4-channel confluence acquisition module will be installed. If the remainder is more than 4, 8-channel confluence acquisition module will be installed.
6.1.4 LCD display module installation dimension (Figure 5)
6.2 Connections of modules
6.2.1 Data cable connection way
The connection between each module is through the external data line. Please confirm the sequence of the two external data line ports before connecting each module. Each confluence acquisition module has two outside connection ports(Figure 4): Port I and Port II, in which Port I is used to connect upstream module and Port II is used to connect follow-up modules. Please pay attention to it that the propulsion part of the data line connector must be fixed with the groove on the port.
The connection sequence order of PV confluence acquisition modules must follow: confluence acquisition module 1's port Ⅱ-->confluence acquisition module 2's port , Ⅰ confluence acquisition module 2's port Ⅱ-->confluence acquisition module 3's port .When connecting the confluence acquisition modules ,multiple confluence modules should be in sequence order, it is not allowed to insert any other function module between two sequenced confluence modules. Wrong connection will lead to abnormal operation of the device.
LCD display module can be connected with Port II of confluence acquisition module, The LCD display module is not necessary to be connected in at ordinary time except when testing and checking.
The address allocation of PV confluence acquisition module is automatically distributed by the power module(main module), The first confluence acquisition module connected to the power module will be distributed automatically with 1st to 8th channels, and the next confluence acquisition module connected to port II will be distributed automatically with 9th to 16th channels, the final confluence acquisition module is distributed automatically with 17th to 24th channel.
6.2.2 Installation schematic
Note: The arrow shows current direction. Wrong connection will lead to abnormal operation of the device.
6.3 Definition of input port
After the address of confluence acquisition module is distributed by the main module,the input channel address of first module is from 1st to 8th channel,the input channel address of second confluence acquisition module is from 9th to 16th channel,the input channel address of final confluence acquisition module is from 17th to 24th channel. The input channel definition of 1st to 8th channel of a single module is shown as Figure 3.
7 Wiring mode
Note: Power supply circuit and voltage measuring circuit must be installed with fuse with 3A rated current and rated voltage that is the highest working voltage in these circuits to ensure safety.
Our Services
Company Information
FAQ
Analysis of common faults and causes
The measurement of the device is not accurate
Check whether the positive and negative terminals of the voltage are correct
Is the current passing through the hall sensor in the right direction
Check whether the IE setting of the device is consistent with the hall sensor used
Whether the output signal of hall sensor matches the required input signal of the device;
Check whether the output negative pole of the voltage output hall sensor is connected to the device GND
Abnormal communication
Check whether the communication cable is connected normally
Check whether the A and B terminals of communication are staggered
Check whether the device address is set correctly and the communication baud rate is set correctly
Multi - device communication is not normal, first try the single communication, to see if it is normal.
The device does not display properly
Check whether it is caused by the insufficient carrying capacity of the built-in power supply to the hall sensor. Replace the external switching power supply to power hall
| DC power meter |
Technical Consult
Contact Us
- Jiangsu Acrel Electrical Manufacturing CO.,LTD
- Contact nameTim Chat Now
- Phone86-1870-6168051
- AddressJiangyin, Wuxi, Jiangsu
Product Categories
New Products
-
ASL100-SD4/16 Acrel 300286.SZ Bridges and tunnels lighting control system 0-10V dimming driver
-
ASL100-SD4/16 Acrel 300286.SZ time control lighting control system 0-10V dimming driver
-
ASL100-SD4/16 Acrel 300286.SZ auto control 0-10V dimming driver
-
ASL100-SD4/16 logistics center lighting control system 0-10V dimming driver
-
Acrel LED display Temperature and humidity Measuring & controlling device WHD46-11
-
Acrel LED display Temperature & humidity controller WHD46-11
-
Acrel loop grid cabinet Temperature and humidity Measuring & controlling device WHD46-11
-
Acrel loop grid cabinet Temperature & humidity controller WHD46-11
-
Acrel LED display Temperature and humidity Measuring & controlling device WHD72-11
-
Acrel RS485 communication Temperature and humidity Measuring & controlling device WHD72-11/C
-
Acrel loop grid cabinet Temperature and humidity Measuring & controlling device WHD72-11
-
Acrel loop grid cabinet Temperature & humidity controller WHD72-11
-
Acrel power distribution system Temperature and humidity Measuring & controlling device WHD72-11
-
Remote automation remote communication and control unit ARTU-KJ8
-
Din rail remote monitoring unit with power relay ARTU-KJ8
-
High quality remote terminal unit used in industrial automation ARTU-KJ8
-
Factory price intelligent power distribution system remote communication & control unit
-
ARTU-KJ8 remote monitoring unit used in the intelligent power distribution system
-
Acrel ARTU-KJ8 intelligent power distribution system Remote Terminal Unit
-
ARTU-KJ8 remote monitoring unit with rs485
-
Acrel ARTU-KJ8 remote communication & control unit
-
Acrel 300286.SZ AM5-C 35kv used capacitor Protection and control Relay for protection control measurement supervision
-
Acrel 300286.SZ AM5-F 35kv used Protection and control Relay for feeder in industrial power systems
-
Acrel 300286.SZ AM5-F 35kv used feeder protection and control relay for utility substations
Popular Searches
- digital electric meter hack
- ami system
- activate electric
- activate electrical
- activate measurement
- activate measurements
- ac energy meter
- a d power meters
- electronical meter
- convenience installer
- power measuring
- display din
- digital swr
- electric analyze
- electric sub
- electron meter
- electrone logos
- electronics meters
- electronics meter
- elecrical
- elecric
- energie powered monitor
- lcd din
- moon phase mechanics
- quality ae
- read instrument
- registered energy
- sound level meter logger
- standard sts
- uv energy
Recommended Products
- PIU2000A 0.01% Grade high precision DC Tester
- Industry-Leading Support Acrel DJSF1352-RN/S RS485 Modbus-RTU Communication Din Rail Type 2 Circuits DC Power Consumption Meter with CE,UL certificate/0.5S accuracy shunt connect
- Innovative Design Acrel DJSF1352-RN/2C RS485 Modbus-RTU Communication Din Rail Type 2 Circuits DC Power Consumption Meter with CE,UL certificate/second channel RS485
- Reliable Performance Acrel DJSF1352-RN/D Rail Type 2 Circuits DC Power Consumption Meter with CE,UL certificate/second channel DC measurement RS485 Modbus-RTU Communication
- Precise Monitoring Acrel DJSF1352-RN/K RS485 Modbus-RTU Communication Rail Type 2 Circuits DC Power Consumption Meter with CE,UL certificate/2DI+2DO
- Acrel DJSF1352-RN Rail Type 2 Circuits DC Power Consumption Meter with CE,UL certificate RS485 Modbus-RTU Communication
- Acrel ADW300/L 1 channel of residual current measurement Din rail smart electrical meter to monitor, collect and manage electricity
- Acrel ADW300/T 4 channel temperature measurement Din rail smart electrical meter to monitor, collect and manage electricity
- Acrel ADW300/K 4DI+2DO Din rail smart electrical meter to monitor, collect and manage electricity
- Acrel ADW300/C Din rail smart electrical meter to monitor, collect and manage electricity with RS485
- Acrel ADW300 Din rail smart electrical meter to monitor, collect and manage electricity
- Acrel ADL3000-E multi tarrif three phase energy meter electric charging meter car 2 Channel RS485 Communication
Find Similar Products By Category
- Instruments & Meters > Meter for Electricity > Energy Meter & Power Meter
Jiangsu Acrel Electrical Manufacturing CO.,LTD
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Jiangsu Acrel Electrical Manufacturing CO.,LTD
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Tim
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile