Electric Dish Soap Dispenser Placed Behind The Mirror Foaming Soap Dispenser

Description:

1 it can match and use together with all kinds of faucets perfectly.

2.It adopts the infrared ray emission and reception technology, which is completely touch-free so that it is convenient and safety.

3.The spout is made of brass plated with chrome and its plating is enhanced, so that the product can maintain a long term fresh color and become more durable.

4.Time-adjustable and amount-adjustable, the users can adjust the dispensing time and foam amount, and it can be used in various

Specification:

1) Automatic on/off: Soap dispenser automatically supplies foam soap as the dispense-time set as soon as hands in sensor range. Soap dispenser automatically stops working if hands out of sensor range..

2) Adjustable sensor range and soap volume by a remote controller (optional).

3) Low power indication: Soap dispenser sensor flash to indicate that it is time to replace existing batteries with new ones if there is not enough power going to the unit. No soap dispensed at this time if hands in the sensor range.

4) Four D-type alkaline batteries shall last approximately 3000 times/month for 6 months.

5) It is suggested cleaning the soap hoses with clean tap water if you will not use the soap dispenser for more than 1 week. How to clean: please pour clean tap water into the soap bottle and sense the soap dispenser until the tap water dispensed.

How to fix automatic soap dispenser

There are mainly the following categories of automatic soap dispenser failure and no liquid:

(1) The infusion hose is damaged, blocking the connection between the liquid outlet and the liquid container, and the hose needs to be replaced.

(2) The sensor is out of order, that is, its switch is out of order. If it is unable to sense that the human hand will not turn on the switch and the liquid will flow out, check and repair it.

Products Features:

●Humanized appearance design, convenient installation design and simple liquid adding design.
●Adaptive or adjustable sensing technology.
●Exclusive development of soap pump technology, can automatically stop reflux.
●Optional AC/DC power supply.
●1000 ml liquid storage bottle.
●Suitable for soap solution viscosity: 100-3800cPs.
●Including necessary installation hardware.
●Meets ASME A112.18.1/CSA B125.1 standard.

●Meets US ADA regulations and CJ/T 194-2004 standards.

How to prevent automatic soap dispenser from triggering randomly

Automatic infrared induction soap dispenser has two working modes: automatic setting time and random time. That is to say, when you extend the soap or foam, let the machine work, but the machine has a specific time. Is to prevent malicious waste. The faucet mainly uses the leisure work way, stops the water with the contraction hand. Its working principle is different from that of infrared automatic induction technology, but the way of receiving signal has changed.

How to open provon automatic soap dispenser

Open dispenser by pushing release on bottom of dispenser. Peel paper off of installation tape, line up screws with anchors, and press firmly into position. Press dispenser firmly onto mounting surface by applying pressure to the inside of backplate for 15 seconds. Do not load refill for at least 24 hours.