IEC 61730 standard Solar panel component rupture tester/Solar panel impact testing Machine/pv module testing machine

Testing frame

 a. The Struction frame raw materials: Steel channel ( approx     the width   ≥100mm )

 b. The frame used welded or securely bolted at the coners to minimize   twisting during impact

 c. It's use the bolted to the floor to prevent movement during impact   testing

 d.The inner dimension of test frame: 2.0×1.0m (It’s adjustable, suit for   diffferent dimension of pv modules  testing)

 e. The sample frame with the rubber bar and the thickness is 3mm,   wide   15mm, hardness shore A50°

 a. The exterior of the bag according to the standard use the   wrapped with   tape

 b. The inner filling diameter 2.5-3.0mm ( the material is   pellets   or   steel ball )

 c.The mass of impactor :45.5 ± 0.5kg

 d.The ratio of widest diameter to height is between 1:1,5 to   1:1,4

Impact height

 300mm , 450mm, 600mm, 750mm, 900mm, 1200mm

Impact height display accurate

 0.1mm

Impactor rise ways

 Automaitc rise/ Jog rise

 Release ways

 arriving predetermined height, the cylinder automatic release

 Real-time display rise height

 Touch screen control and display

 a. Before release delay warning function

 b. With the safety protection frame

 c. Anti-secondary impact function