IEC60529 IPX3 IPX4 waterproof test for enclosure, Oscillating Spray Tester

Wooden box

IEC60529 IPX3 IPX4 waterproof test for electronic product Oscillating Spray Tester

IEC60529 IPX3 IPX4 waterproof test for electronic product Oscillating Spray Tester

Introduction:

The IPX3-4 Oscillating Spray Tester meets the requirements of IEC 60529 and other major standards. A touch screen controller is used to establish the test and control oscillation range, speed, and time of test. The controller and other operating components are enclosed in a stainless steel cabinet.

Numerous tubes are available to meet differing specimen sizes. These tubes are made of stainless steel and come with nozzles that can be shut off. This allows the same tube to be used for IPX3 and IPX4 with a simple adjustment to some of the nozzles.

The tubes oscillate to almost 180 degree either side of vertical. The degree of oscillation can be set on the touch screen controller or one of the three pre-set values, 60 degree, 90 degree, or almost 180 degree, can be selected.

A specimen support is also included. It is supplied with two specimen bases - one perforated for IPX4 and one non-perforated for IPX3. The support is made from stainless steel and mounted on wheels for easy maneuverability and adjustment. It offers height adjustments that range from 855mm to 1300mm. 

Applications:

The oscillating spray tester is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray. This tester is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage. The oscillating tube will have spray holes over 90 degree of the tube for IPX3 and over the full 180 degree for IPX4. In IPX3 the tube will oscillate to 60 degree either side of the vertical. For IPX4 the tube travels through an angle of almost 360 degree. The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens.

The place requires: 3.5m height of center, 3.3mX5m space area, with good drainage.

Conforms To:

IEC60529,IEC60598-1, IEC 60335-1, EN60335-1, IEC60950-1, GB4208, GB7000.1

Specification:

1. Input Power: Single phase with ground AC220V ± 10%, 50Hz.
2, the use of water: the customer must provide the flow rate ≥10L / min ± 5% clean, no impurities of water.
3, power consumption about: 750W.
4, the pendulum tube angle: vertical direction ± 60 °, ± 90 °, or ± 175 ° swing range.
5, tube oscillate time: Each swing (2 × 120 °) about 4S, every swing (2 × 90 °) about 6S or per swing (2 × 350 °) about 12S.
6, test time: 0.01S ~ 99h99min can be preset.
7, put the tube on the nozzle hole Φ0.4mm.
8, wheel diameter: Φ600mm.
9, the turntable speed: about 1rpm.
10, turntable angle: horizontal.
11, to bear the weight of the chassis: ≤100kg,
12, to bear the weight of the column: ≤50kg.
13, water flow: 1.8 ~ 18LPM adjustable.
14, the oscillating tube radius: R1400mm (customized according to customer requirements).
15, use of space requirements: Center height: 3.5 meters, covers an area of: 3.3 m × 5 m with good drainage.

Company Profile

Shenzhen Bonad Instrument Co., Ltd.

 14 Stanards drafted and issued by Labthink  -- 100 Patents granted by Labthink -- 410 m2 Laboratory to provide testing services  -- 20 years experienced lab technicians to provide solutions -- 12 months warranty  -- Remote Services (Free of Charge allthrough lifetime)

View more

Contact Us

Shenzhen Bonad Instrument Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Shenzhen Bonad Instrument Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now