Home > Products > ceramic balls > High quality ground ceramic balls with various alumina content
High quality ground ceramic balls with various alumina content
- 100000 Piece / Pieces per Month
- Qingdao
- T/T L/C D/P D/A Credit Card PayPal Other
You May Like
-
Pneumatic Fly Ash Ceramic Lined Inlet Steel Tube
-
Steel Pipe with Lining for Pneumatic Conveying System
-
Factory Price 92% Al2O3 Heat Resistant Insulation Refractory Alumina Ceramic Tube
-
Pulp Cleaner Low Consistency Desander Slag Separator Sand Remover
-
Vacuum Suction Top Box for Ceramic Dewatering Element
-
95% Al2O3 Alumina Ceramic Mosaic Tile by China Supplier
Product Description
Basic Info.
Name | Long(L)mm | Outside diameter(R)mm | Internal diameter(r)mm | Notes |
Alumina Ceramic Tube | ≤500 | 30-450 | 30-450 | Tolerance of each dimension±1% |
Specifications
Name: | 99% Alumina Ceramic Tube | ||||
Size: | As your request | ||||
Content of Al2O3: | ≥ 99% | ||||
Density: | 3.9g/cm3 - 3.95g/cm3 | ||||
Max. Length | 2000mm | ||||
Usage temperature: | ≤1800oC | ||||
Color | Ivory | ||||
Chemical component | |||||
Al2O3 | R2O | Fe2O3 | SiO2 | ||
≥99% | ≤0.2% | ≤0.1% | ≤0.2% | ||
Technical parameters | |||||
Volume density: | ≥3.80 g/cm3 | ||||
Apparent porosity: | <1% | ||||
Bending resistance: | >350 Mpa | ||||
Compressive strength: | >12000 Mpa | ||||
Dielectric conatant ε (1MHz): | 2 | ||||
Maximum usage temperature: | 1800C | ||||
Usage 1) Thermocouple protections; 2) Heat treatment furnace and toughened furnace; 3) Inner liner tube and heating tube in electric furnace; 4) Some are used in furnaces. |
Points to note for transport and installation
Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.
2. The yunfeng bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.
3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.
4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.
5. When using flange connection, the flange end shall be flush with the end of the composite pipe.
6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.
FAQ
01.How to buy your products?
A: You can provide us yourtechnical parameters.(connect us for more details).
02. How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
03. What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
04. How to install after the equipment arriving destination?
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.
Contact
Twiter:@Daianna28364490
Facebook: Aana
Email:634107452@qq.com
Contact Us
- Qijing Trading Co., Ltd.
- Contact nameANNA Chat Now
Product Categories
Alumina ceramic sheet | Alumina ceramic tube | Paper making equipment | ceramic balls |
Alumina Ceramic Plate | Papermaking equipment | Ceramic dehydration board | Mosaic |
Composite rubber ceramic plate |
New Products
-
Ceramic Dewatering Elements for Paper Making with High Quality
-
China 92% Alumina Ceramic Square Mosaic Wear Plates Tiles
-
China Cheap Wholesale Alumina Wear Resistant Rubber Backed Ceramic Plate
-
Paper Industry Medium Consistency Sand Remover for Kraft Paper
-
92%Alumina Ceramic Tube
-
Weldable Alumina Ceramic Brick Liner and Ceramic Linings for Abrasion Resistance
-
Competitive Price Abrasion Resistance Ceramic Pipe Lining for Mining Industry
-
Competitive Price Abrasion Resistance Ceramic Pipe Lining for Mining Industry
-
High Consistency Sand Remover for Paper Pulp Making
-
95% Al2O3 Alumina Ceramic Mosaic Tile by China Supplier
-
Chinese Ceramic Plate Type 95% Alumina Ceramic Tile with High Wear Resistance and Corrosion Resistance
-
92% 95%97%99% high-quality wear-resistant and corrosion-resistant alumina ceramic lining patch
Popular Searches
- injection mold
- stainless steel
- sheet metal
- Motorcycle Accessory
- colorful anodize
- motorcycle parts
- machining parts
- Cnc Machining Service
- Laser Cutting Service
- Welding Service
- sheet metal fabrication
- Metal Fabrication Service
- Welding Fabrication Service
- cnc fabrication
- Laser Cutting Fabrication Service
- metal sheet fabrication
- welding fabrication work
- small metal fabrication
- Metal Part Fabrication Service
- silicon mold
- Machining Part Fabrication Service
- steel fabrication service
- cnc turning parts
- abs plastic cnc prototyping
- Aluminum Fabrication Service
- customed prototype
- alumina ball
- ceramic ball
- grinding media
- Alumina Ceramic Ball
Recommended Products
- winches brake
- mining truck brake
- Custom Manufacturer power supply vapor chamber copper pipe aluminum led zipper fin large heatsink heat sink
- DN15 316 Stainless Steel Brass SS Y Strainers Filter Manual Mesh Insert
- OEM stainless steel investment precision casting with machining
- Stainless Steel 304 Filter Flange End SS Y Strainers
- Variety of Sizes of Plastic Cover for Ball Valve Lever Handle
- Cast iron parts
- B125 300mm 600mm,900mm dia oem EN124 light duty ductile iron manhole covers&frame
- EN124 D400 60x60 Epoxy Painting Ductile Iron Sewer Manhole cover and Drain Grating Price
- EN124 E600 600 800mm Bitumen Or Epoxy Coating Heavy Duty Cast Iron Manhole Covers
- EN124 B125 double seal ductile iron manhole cover lock
Find Similar Products By Category
- Manufacturing & Processing Machinery > Casting & Forging > Die Casting

Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
ANNA
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile