IP Based Amplifiers

※ Rated power 60W/120W/240W/350W/500W available.
※ Rack installing design with 2U alloy panel.
※ Embedded computer technology
※ 70V/100V voltage and 4-16 Ohm output .
※ 3 MIC. inputs and 2 LINE inputs.
※ BASS and TREBLE tone controller.
※ Individual volume controller inputs.
※ 1 AUX output for additional amplifier.
※ MIC1 overrides other inputs
※ 5 LED indicators for working status.
※ Supports protocols of TCP/IP,UDP,IGMP.
※ Hifi audio balance ensure that the reduction and DSP audio processing technology.
※ MIC1 overrides other inputs with 0~30dB dB attenuation.

The RH-AUDIO IP Amplifier offers an ideal solution for some venues that need to dolarge-scalepaging and multizoned
background music across multiple facilities and locations with complex distribution and scheduling needs.

It's easier than ever to install a very wide paging or intercom system using your existing Ethernet network.

The IP based amplifier can be placed wherever you have a network drop without need for long speaker wire connections from a large central amplifier.

With IP based amplifier you will enjoy a quicker and more flexible installation than traditional wired analog systems.

Note:
? 4-16 Ω output drives the speakers based on impedances.    
? 70V/100V outputs drive the speakers with built-in step-down transformer.
? Do not use both the 4-16 Ω,70V and 100V terminals at the same time.
? Impedances indicated in the figures represent the total speaker system (load) impedances.