Uns S35000 AISI 633 AMS5548 AMS5745 Stainless Steel Rod packing:Conventional Seaworthy Packing Or As Customer Requirement

Uns S35000 AISI 633 AMS5548 AMS5745 Stainless Steel Rod

350 is a stainless steel with chromium nickel molybdenum added and can be hardened by martensitic transformation and precipitation hardening. Depending on the heat treatment, the 350 may be an austenitic structure with the best molding properties; it can also be a martensitic structure with martensitic stainless steel strength. The alloy usually contains 5-10% delta ferrite. Its corrosion resistance is close to other chrome-nickel austenitic stainless steels.
350 alloy can be used for turbine compressor parts, such as blades, brake discs, rotors, shafts, etc. at room temperature and medium temperature need to withstand high strength parts.
 
chemical component%

350 alloy corrosion resistance is better than other hardenable martensitic stainless steel. In the normal environment and a variety of mild chemical environment, 350 alloy showed good corrosion resistance. The material in the repeated aging state is susceptible to intergranular corrosion because of the occurrence of chromium carbide precipitation. However, if the material by the following method to do the hardening treatment, can be better tolerated intergranular corrosion.
The stress corrosion resistance of the 350 alloy was increased by heating to 1010-1066 ° C, rapidly cooling to room temperature, cooling for 3 hours at -73 ° C and then reheating to 927-954 ° C for 90 minutes / Inch thickness, quickly cooled to room temperature, cooled at -73 ° C for 3 hours, and then tempered at 538 ° C for 3 hours.
In order to achieve the best corrosion resistance, the surface of the material shall not be skin, can not have lubricants, foreign objects and so on. After processing, parts should be thoroughly cleaned and passivated.
 
Physical properties
 
Specific gravity: annealed state -7.92; low temperature cooling, 454 ° C tempering state -7.81
Density: annealing state -0.2860 lb / in3; tempering state -0.2820lb / in3
Melting distance of 2500-2550 ° F 

Pictures of stainless steel bar :

Company Profile

Jiangsu Cunrui Metal Products Co., Ltd.

JiangSu CuiRui Metal Products Co., Ltd Is Located In Jiangsu Province Wuxi City, The Large South Stainless Steel  Markets In China, Is Also One of the Powerful Company In the Stainless Steel Area With Large Scale And Long History. We Have 2000 Square Meters Of Storage And Processing Center Which Covered Equipment Using In Slitting, Cutting In horizontal, Laser Cutting , Plasma And Grinding Machine And Embossing Machine. We Mainly Sell Stainless Steel Sheet, Pipes, Coils, Bands, Section Bars And So On Which Are Applied In Decoration, Medical Industry, Food Industry, Construction Industry etc, And Have Gained Gain Good Feedback And Establish Mutual Trust With Our Clients. According To Your Requirement We Can Process Brushed Film, 6k, 8k Mirror, Polishing, Yellow Titanium, Black Titanium, Rose Gold, No Fingerprint, And All Kinds Of Colored Stainless Steel Sheet

View more

Contact Us

Jiangsu Cunrui Metal Products Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Jiangsu Cunrui Metal Products Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now