Flang Nut Flange Nut supplier flang nut sleeve anchor Nut

Flang Nut  Flange Nut supplier  flang nut sleeve anchor  Nut

Size: M6-M24

Standard: DIN, ANSI, GB

Surface: ZP/HDG/BLACK

Material: Carbon Steel

The flange nut, the gasket and nut are integrated, and there are anti-skid teeth at the bottom, which increases the surface area contact between the nut and the workpiece, making it stronger and more tensile than the normal nut gasket combination, Flange nuts are used for piping and flanges

Flange nuts and general hexagon nuts size and thread specifications are basically the same, but compared with hexagon nuts, it is the gasket and nut is an integral, and there are anti-skid teeth, which increases the surface area of the nut and the workpiece contact, compared with the common nut gasket combination, more firm and greater tension.[1]Generally common flange nut specifications are generally in the M20 below, because most of the flange nuts are used in the pipe and flange disk, so subject to the workpiece constraints, flange nut specifications and nuts compared with less.Some flange nuts above M20 are mostly flat flanges, that is, there is no tooth grain on the flange surface. Most of these nuts are used in some special equipment and special places

We are a Wood Screw wholesaler.Since the beginning of this century, the company has been engaged in wedge anchor,white zinc plated drop in anchor,Expansion Bolt and custom chemical anchor manufacturing industry, and has won widespread favor and approval.

If you are interested in our products, click here to find out more.

/

More information:

https://www.article4.us

https://

https://

https://

https://

https://

https://

https://www.b2binindia.in

https://.uk