Replacement Warman Slurry Pump Parts

Base: U-steel
Bearing: ZWZ, SKF, NSK, TIMKEN
Shaft: 40CrMo, SS316L
Mechanical seal: Burgmann
Packing seal: Asbestos fibers+mica, PTFE
Expeller seal: High chrome
Casing: HT250, QT500, Stanless Steel, Chrome alloy etc
Wetted parts: High chrome, Rubber, Polyurethane, Ceramic etc

Slurry Pump Spare and Wearing Parts are an unavoidable cost associated with operating centrifugal slurry pumps, the primary slurry pump parts included impeller, volute, frame plate liner insert, throatbush and bearing assembly etc., TOBEE^? provides replacement parts for Warman pump spare parts and stock a range of slurry pump wetted end parts which have been developed for abrasive applications in mines, quarries, sand and gravel etc.

The Main Parts for Slurry Pump Spare and Wearing Parts:

? Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
? Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
? Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
? Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
? Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

Tobee^? Metal Slurry Pump Parts are manufactured to the highest degree of mechanical integrity through the use of accurate 3-D modeling. Tobee uses the latest SolidWorks and FaroArm technology to design precise slurry pump parts at the beginning of our manufacturing process, and inspect and verify those parts before shipping. Tobee cast slurry pump parts can handle the toughest abrasive applications, and adhere to all relevant ASTM standards. Our most popular 27-28% high chrome metallurgy has a guaranteed 650+ Brinell hardness. A variety of alternative metallurgies are available for more corrosive applications.

Slurry Pump Parts Range:
? Metal materials code: A03, A04, A05, A06, A07, A12, A14, A25, A33, A49, A51, A61
? Nature rubber materials code: R08, R24, R26, R33, R38, R55, R66
? Synthetic rubber materials code: S01, S02, S10, S12, S21, S31, S42, S44, S50
? Polyurethane materials code: U01, U38
? Shaft material: 45#, 40CrMo, SS304, SS316
? Shaft sleeve material: SS410, SS420 SS304, SS316, Ceramic
? Lantern ring material: SS304, SS316, PTFE
? Bearing housing/ end cover material: G01, D21
? Expeller, Expeller ring: HT250, A05
? Packing: Q05, Q21, Q22, X06
? 100% interchangeable with AH, AHR, HH, M, L horizontal slurry pumps, SP, SPR vertical slurry pumps, G,GH gravel pumps, AF/AHF froth slurry pumps, MCR mill circuit pumps etc

Slurry Pump Parts List:

When it comes to slurry pumping, it is not a question of whether or not you will need slurry pump parts, it is a question of when. Slurry pump parts from Tobee provided to their customers are just more than slurry pump parts for severe duty applications, Tobee provides adding value by meeting the changing needs of our customers. We are willing to work with you to fix your pump problems. Tobee proudly manufactures thousands of slurry pump parts which are fully fit for Warman, Metso, Goulds, GIW, and other OEM pumps. The maintenance of slurry pumps can be categorized into three main areas: slurry pump wet end maintenance, drive end maintenance and shaft seal maintenance, so our slurry pump parts are categorized according to this thinking.