Pure Hydrogen Engine Cleaning Machine

The Engine Carbon Clean system works by using tap water to create hydrogen and oxygen which pass through the air intake of an engine and out through the exhaust system as a gas, helping to remove the excess carbon that leads to poor running issues.

It’s a simple and safe process and requires no dismantling of engine parts or the use of harmful chemical products. We recommended using the Engine Carbon Clean service as part of your vehicle’s regular maintenance schedule.

The advanced “PEM” technology is applied to this machine which electrolyzes pure water to generate 99.99% purity hydrogen, and controlled by microcomputer, neither backfire nor explosion is occurred. This safe and reliable machine is the best one for cleaning car engine.

Key Features

1. Microcomputer control system that enables automatic operation;

2. Intellectual control to detect the engine stop

Easy and safe operation

1. Controlled by microcomputer and automatic operation that is reliable, stable and safe;

2. Without any catalyst, only pure water (secondary distilled water) is needed to generate gas under atmospheric pressure;

3. Unnecessary to dismantle the engine, directly connect to the intake manifold of the engine;

4. Unnecessary to replace the grease or grease seal, and zero cost of replacing consumables or dismantling parts.

Timesaving

The operation time is varied depending on different car engine:

40 minutes for engine volume more than 2000cc;

20 minutes for engine volume less than 2000cc;

Economy

Only fill with pure water (secondary distilled water). Water consumption is less than 20-30ml/min. Power consumption is less than 0.6kWh each time

Effective

After using our machine to clear the carbon deposit and oil dirt in the car engine, the horsepower will be increased and the oil consumption will be reduced. It brings you a comfortable driving experience.

Green and Environmental Protection

1. After cleaning carbon deposit in the engine, the waste gas emission and the environmental pollution is reduced.

2. No reagent is needed and no pollution to the environment. Protect the operator’s health.