Steel Hemispherical Head Head Pressure Vessel Boiler Part For Pressure Vessel

Looking for ideal DN200 SCH40 CAP Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the ASME B16.9 BW FITTINGS CAP are quality guaranteed. We are China Origin Factory of BW FITTINGS DN200 SCH40 CAP. If you have any question, please feel free to contact us.

ASME B16.9 BW FITTINGS DN200 SCH40 CAP,Since most of the pipe fittings is for welding, in order to improve the quality of welding, the fittings end are bevelling groove, leaving a certain angle, with a certain edge, which is a relatively strict requirements, how thick edge, and how much deviation angle range has prescribed. Pipe fittings surface quality and mechanical properties and tubes are same. In order to facilitate welding, the connected steel pipe and the fittings materials are the same.

P265GH/A234WPB EN10253 DISHED ENDS Naote that the process of manufacturing process: the right approach is: cutting (scribing) - small board fight into the board - forming - nondestructive testing if the test is not done before molding is wrong, can not guarantee after molding products the quality of. In other words, nondestructive testing refers to the final non-destructive testing..
Standrad
1 )Standard: ASTM, ASME , DIN ,JIS,API ,GB ,ISO
2) Certifications : ABS ,CC ,TUV,CC ,GL ,BV ,ISO14001 ,ISO9001 ,OHSMS
Material :
Carbon Steel: ASTM A-234 (WPB,WPC)
EN 10216-2 (P235GH,P265GH)
EN10222-2(P245GH,P280GH)

NF A49-213 (TU42C,TU48C)

Low Alloy Steel : ASTM A-420(WPL6)

ASTM A-234(WP11,WP22,WP5)

ASTM A-860(A860-WPHY52)

Stainless Steel: ASTMA403M (WP304,WP304L,WP304H,WP316,WP316L,WP321,WP321H,WP347,WP347H) EN10216-5(X2CrNiN18-10(1.4311),X5CrNi18-10(1.4301),X5CrNiMo17-12-2(1.4401),X2CrNiMo17-12-2(1.4404)