UTERS replace of PARKER factory direct hydraulic oil filter element SF-1-R-40 accept custom

UTERS replace of PARKER factory direct  hydraulic oil  filter element SF-1-R-40  accept custom

Ex-work unit price: USD 39.00

Filter model SF-1-R-40

Manufacturer Henan Uters  Industrial Technology Co., Ltd.

Product brand  UTERS / (both parties negotiate)

Filter type Hydraulic oil filter

Product size MM x MM

End cap material: Galvanized carbon steel

Frame material: Carbon steel galvanized punching skeleton

Filter material glass fiber

Filtration accuracy 1 ~ 100um Filtration ratio: X ≧ 100.

Working pressure: 21bar ~ 210bar.

Working medium Conventional hydraulic oil.

Working temperature: -30 ℃ ~ + 100 ℃.

Structural strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa.

Use of filter element Oil suction line, pressure oil line, oil return line, bypass, separate filter system.

Application areas Steel, electric power, metallurgy, shipbuilding, aviation, papermaking, chemical industry, machine tools and engineering machinery, construction machinery and other fields.

Packaging Specifications Each product is packaged individually, in a dust-free package inside a plastic bag, and in an outer kraft box.

Transportation services Express logistics delivery, aging time is 3-4 working days.

Production cycle After the contract is signed, both parties negotiate 7-10 working days.

After-sales service Quality assurance within 1 year after delivery, so you can use the product without worry!

Instructions for use

01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. The hydraulic oil must be filtered when refueling, and the refueling tools should be cleaned reliably. The filter at the filler opening of the hydraulic tank cannot be removed in order to increase the refueling speed. Fuelling personnel should use clean gloves and work clothes.

02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station must use a filter that can filter both particles and moisture; there are sold in the market;

03. The cleaning oil of the hydraulic system must be the same as the hydraulic oil used in the system. The oil temperature is between 45 ~ 80 ° C. Use a large flow to remove as much impurities as possible from the system. The hydraulic system should be repeatedly cleaned more than three times, and after the cleaning is completed, all the oil is released from the system while the oil is hot. Clean the filter after cleaning, and fill with new oil after replacing the new filter element.

Supplementary note: The filter element is originally a consumable, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system's fuel tank and pipelines are flushed clean. When refueling, through the fueling device with a filter, do not let the oil in the fuel tank directly contact the air, and the old and new oils do not mix, it is still helpful to extend the life of the filter element.

Maintenance matters

01. Before replacing the original hydraulic oil, check the oil return filter, oil suction filter, pilot filter to see if there are iron filings, copper filings or other impurities. In some cases, there may be failure of the hydraulic components. After troubleshooting, Clean the system.

02. When changing the hydraulic oil, all hydraulic oil filters (return oil filter, suction filter, pilot filter) must be replaced at the same time, otherwise it is equivalent to not changing.

03. Distinguish the hydraulic oil label. Different types and different brands of hydraulic oil are not mixed, and may react to deteriorate and produce floc. It is recommended to use the specified oil for this excavator.

04. An oil suction filter must be installed before refueling. The nozzle covered by the oil suction filter directly leads to the main pump. If the impurities are light, the main pump will be accelerated and the pump will be pumped.

05. Refuel to the standard position. There is usually an oil level gauge on the hydraulic oil tank. See the liquid level gauge. Pay attention to the parking method. Generally, all the oil cylinders are retracted, that is, the forearm and bucket are fully extended and landed.

06. Pay attention to the main pump to exhaust air after refueling. Otherwise, the vehicle will be temporarily inactive for a while, the main pump will be abnormal (air squeaking), and the air pocket will damage the main pump. The method of exhausting air is to loosen the pipe joint directly on the top of the main pump and fill it directly.

Purchasing Guidelines

01. Detailed Communication

When you see our products, you can tell us through the online communication software on the right side of the shop or by phone that you want to consult the ordered product information, or learn more information, such as: product parameters, order quantity, whether to issue an invoice, delivery time ...... We will reply you as soon as possible!

02. Requires VAT

You can contact our online customer service staff to inform you of your needs. We support the issue of special VAT invoices and ordinary invoices for public account transactions.

Any questions,just feel free to contact with me any time:

Whatsapp/Wechat/Skype:+86 18300643699

Email:sophia.qin@hqfiltration.com

I am always online for your good service!