Hot Sale Fish Meal/Poultry Animal Food Pellet Making Machine

Hot Sale Fish Meal/Poultry Animal Food Pellet Making Machine

 Raw materials for fish food pellet:
Most fish food pellet inculding animal protein and plant protein, Plant protein adopts corn flour,rice flour,wheat flour,soybean flour,peanut cake powder..Animal peotein adopt fish meal, shrimp meal,crab meal, sleeve-fish meal and so on.you can add other ingredient according to the local fish live require.

Advantages of  feed making machine:

1. The seal of the pressure roller and spindle bearing adopts a fully-enclosed design. The bearing and grease are free from contamination, and the bearing has a long service life, which saves maintenance time.

2. The overall press roll adopts a three-roll design to increase the efficiency of the press work, and the roll press material has a wider application range.

3. The material of the mold plate is fully upgraded, the alloy steel is forged and processed, and after vacuum heat treatment, the material is wear-resistant, the hardness is high, and the service life is long.

4. The die plate die hole is processed by automatic CNC drilling, which has high processing precision and good finish, which can increase the productivity of the machine and reduce the production cost.

5. The gearbox adopts a quasi-hypersurface bevel gear, which has high transmission efficiency, stable transmission, high bearing capacity, reliable work, compact structure, energy saving, material saving, space saving, wear resistance, long service life, and low noise.

Matters need attention

1. The new machine for the first time must be run or otherwise can't be used normally.
2. When the pellet machine is working, don't reach into the input hopper by hand. If necessary, you can use a stick to help.
3. Before the machine is turned on, you need to add a little mixture before starting. When the machine is shut down, please leave a little mixture in the machine to prevent the roller and the template idling.
4. When the machine is working, and the phenomenon of stuck happens, should immediately stop and make the roller pressed to the bolt loose, and then restart the machine.
5. Each time the work is completed, the bolt of adjusting roller must be released.
6. If the machine is used for a certain period of time or squeeze out a certain amount of pellets and the pellets are made into pieces or the pellets are broken, the template should be turned to the bottom, and 2%-4% water should be added to the mixture.
7. Please often check the belt tightness to prevent the emergence of low yield, belt slippery and so on.
8. Before starting, firstly add gear oil to the gearbox reaching to 2/3 of the horizontal axis. Pellet machine in the first use should work in low load for 40 hours or so, and then replace the gearbox gear oil, 100 hours after the regular replacement. All bearings should be regularly filled with grease.
9. Particle machine works continuously and then the motor fever reaches to 70 degrees Celsius, it is a normal phenomenon.