RxSOLUTIONS TECHNOLOGY CO., Ltd: Shenzhen, Guangdong, China; Main products: Axial cooling fan, blower fan, centrifuge cooling fan, CPU fan

Home
Product Categories

AC cooling fan

DC cooling fan

DC blower fan

cooling fan for summer jackets
Company Profile

Company Introduction

Photo Gallery
Blog
Quality Control
Contact Us

Home > Products > cooling fan for summer jackets > 7.4v cooling clothing fan with 7.4v rechargeable battery pack

7.4v cooling clothing fan with 7.4v rechargeable battery pack

FOB Price

US$ 6 - 20 / Piece

100 Pieces(Min. Order)

Port ShengZhen
Payment TermsT/T PayPal

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	RxSOLUTIONS	Place of Origin	China
Model Number	YZC-9846	Type	Fan
Application	Other, Air-conditon clothes,3d printer ,household appliances	Heatsink Material	Copper & Aluminum

Product Description

Rx SOLUTIONS cooling fans and blowers provide cooling solutions to your system thermal problems. The need for forced-air cooling by using an AC or DC axial fan or blower should be determined at an early stage in the system design. It is important that the design plans for good airflow to heat-generating components and allows adequate space and power for the cooling fan or blower.

1.References for battery working time:

The tested battery capacity is 4400mAh.

The working time for the fourth gear is 8 hours and forty-five minutes.

The working time for the third gear is 12 hours and ten minutes.

The working time for the second gear is 23hours and 18minutes.

The working time for the first gear is 59hours and 52 minutes.

2.Manual:

1.Starting and instruction

Press ON/UP to check the battery capacity left, press the button for1.5second to start the cooling system. It normally shows the fourth gear.

2.Shutdown

Press the key OFF/DOWN 1.5 second, The digital Led will be putted out.

When it is unloaded, the battery will be automatically powered off in 5 second.

When the battery is exhausted, it will be also shutdown in 2s.

3.The power instruction for discharging

There are 10 grades of the battery capacity , using number from “0”to”9”to show. When

The number “0”flashes,it means lower power, and the battery will be shut down soon. and

The number”9”means the fully charged.

4.Charging instructions

After the charger connected with the DC connector, the digital tube showing

charging condition and the decimal point will remain flashing. when it

get to the full power, it shows number “9” ,and meantime the decimal point will not flash

again . The degree of the power depends on the signal light, when the charger light shows green, it means the power is fully charged.

5.Short circuit over loading protection:

When the output interface short circuit, the battery will automatically go into

The protected condition. It needs to charge to activate the battery.

6.The ability for loading

The maximum output voltage is 2A.

3. Functional parameter reference form are the following:

Gear	Battery showing number	Output voltage
4	4	7.4V
3	3	6.0V
2	2	4.5V
1	1	3.0V

FAQ

1. What is a DC/AC Axial Fan?

An AC/DC fan is usually powered by 3v, 5v, 12v, 24v, 36v and 48v. It blows air along the axis of the fan, or parallel to the track of the blade axis. Standard DC Axial fan sizes include 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 92mm,120mm, 150mm, and 200mm.

2. How to choose a AC/DC fan?

To choose a AC/DC fan, you should consider the points below

a. fan voltage

b. fan current

c. fan speed

d. fan airflow

e. fan noise

f. fan lifespan

3. What is a bearing?

Fan bearing includes Sleeve Bearing and Ball Bearing, life expectancy of sleeve bearing fan is 30000hours, while ball bearing is 50000hours or more.

4. How do we carry out quality control?

Usually, there are two ways to monitor reliability during the manufacturing process.

a. Early Life Test

This is used as a mean of process control aimed at identifying any latent manufacturing problems and determining the effectiveness of burn-in. Every day, 5 samples will be picked up randomly from one of the production lines for burn in at 50°C+/-5°C for 24 hours.

b. On-going Reliability Demonstration

This is a longer-term program aimed at providing data on continuous basis to demonstrate the reliability of product. 10 units per month are randomly collected from one of the production lines for burn-in for 168 hours at 50°C+/-5°C. Units are monitored and tested on daily basis. Failed units will be analyzed and corrective actions taken where necessary.

5. What can I do if we can not find the suitable fan model in the fan list?

Please contact us for customized fans.

Our Services

1.Sample Policy: Free Sample with Freight Collect

2.Sample Lead Time: 2-5 Days

3.MOQ : 100PCS

4.Order Lead Time: 5-20 Days

5.Other: OEM & ODM available

Contact Details

Name:EmilyZhang

skype number: emily_zhang668

wechat number:emilyzhang9420

Mobile phone:13609689281

Have any question or request feel free to contact me anytime,thanks

Contact Us

RxSOLUTIONS TECHNOLOGY CO., Ltd: Contact nameEmilyZhang
Chat Now; Address5F #2 HongChangFa industrial park longXi community LongCheng street LongGang district ,, Shenzhen, Guangdong