Stainless Steel Johnson Exchange Nozzles Filter

The ion exchange nozzles are generally installed on multi-well plates to replace the old quartz sand mats to prevent the loss of resin, reduce resistance during backwashing, and allow the resin to fully expand.

The Nozzles Filter is spirally wound around a cage of longitudinal support rods. Each intersecting point of these wires is fusion welded, with a unique welding process. This spacing gives passage for water to enter. The entire process is completed on fully computerized machines. The pitch of winding gives different spacing between two adjacent turns of wire. 

Material: stainless steel 304,304L,316,316L,321,430 or as per your request.

Features:

1. Type 316L stainless steel construction.

2. Continuous slot design provides a large circulation area

3. The standard nozzle is 2in/51mm diameter and can be attached to the plate either with threaded end fittings or "L" blots.

4. Standard slot opening is typically range between 0.006”(0.15mm), and 0.020in./0.50mm wide suitable for 40 to 50 mesh size media, Other slot sizes are also available.

5. The wedge wire screen is highly resistant to plugging.

6. Choice of either 3/4” NPT or 1” NPT fittings are available from stock. Other styles, such as tee-bolt mountings, and drop tubes are readily available.

7. Unaffected by temperature, corrosion-resistant, aging resistant, long life span, easy change, safety and environmental friendly.

Filter nozzle used in liquid/solid or gas/solid separation. Their design and quantity will vary depending on the application and customer-flow requirements. Nozzles allow more effective use of the treatment media.

Application: Filter nozzle used in liquid/solid or gas/solid separation. Their design and quantity will vary depending on application and customer-flow requirements. Nozzles allow more effective use of the treatment media.

Specifications: