Danfoss Strainers Type FIA15-20 FIA32-40 FIA50-65 Filter

Danfoss Strainers Type FIA15-20 FIA32-40 FIA50-65 Filter Product introduction

FIA strainers are a range of angleway and straightway strainers, which are carefully designed to give favourable flow conditions.The design makes the strainer easy to install,and ensures quick strainer inspection and cleaning.

FIA strainers are used ahead of automatic controls, pumps, compressors etc., for initial plant start-up and where permanent filtration of the refrigerant is required. The strainer reduces the risk of undesirable system breakdowns and reduces wear and tear on plant components.

FIA strainers are equipped with a screen mesh of stainless steel, avail able in sizes 100, 150,250 and 500μ (microns*), (US 150, 100, 72, 38mesh*).

Danfoss Strainers Type FIA15-20 FIA32-40 FIA50-65 Filter Features

? Applicable to HCFC, HFC, R717 (Ammonia),

R744 (CO 2 ) and all flammable refrigerants.

? Modular Concept:

– Each valve housing is available with several

different connection types and sizes.

– Possible to convert FIA strainers to any

other product in the Flexline TM SVL family

(shut-off valve, hand operated regulating

valve, check & stop valve or check valve) just

by replacing the complete top part.

? Fast and easy overhaul service. It is easy to

replace the top part and no welding is needed

? Filter net of stainless steel mounted direct

without extra gaskets means easy servicing

? Two types of strainer inserts are available:

- A plain insert of stainless steel.

- A pleated insert (DN 15-200) with extra

large surface, which ensures long intervals

between cleaning and low pressure drop.

? FIA 15 – 40 ( 1 ? 2 – 1  1 ? 2 in):

A special insert (50μ) can be used in

combination with a standard version when

cleaning a plant during commissioning.

? FIA 50 – 200 (2 – 8 in):

A large capacity filter bag (50μ) can be inserted

for cleaning plant during commissioning.

? FIA 80-200 (3 – 8 in) can be equipped with a

magnetic insert for detention of iron particles

and other magnetic particles.

? Each strainer clearly marked with type, size and

performance range

? Housing and bonnet of low temperature steel

in accordance with the requirements of the

Pressure Equipment Directive and those of

other international classification authorities

? Temperature range:

-60 – 150 °C / -76 – 302 °F

? Max. working pressure:

52 bar g / 754 psi g

? Classification: DNV, CRN, BV, EAC etc.

To get an updated list of certification on the

products please contact your local Danfoss

Sales Company