Underwater Cutting Rods Coated With Waterproofing and Insulating Material Such as Electrical Tape With 18 or 36 Inches Long

What is underwater cutting torch?

A thermal lance, thermic lance, oxygen lance, or burning bar is a tool that heats and melts steel in the presence of pressurized oxygen to create the very high temperatures required for cutting. It consists of a long steel tube packed with alloy steel rods, sometimes mixed with aluminium rods to increase the heat output. One end of the tube is placed in a holder and oxygen is fed through the tube.

The far end of the tube is pre-heated and lit by an oxyacetylene torch. An intense stream of burning steel is produced at the workpiece end and can be used to cut rapidly through thick materials including steel and concrete. The tube is consumed, so every few minutes the operator shuts off the oxygen, discards the remaining stub of a lance tube and starts using a new one.

Although often used as a heavy duty demolition tool, the thermic lance can also be used to remove seized axles of heavy machinery without damaging the bearings or axle housing. This technique is most often used on the pins and axles of large equipment such as cranes, ships, bridges and sluice-gates.

The temperature at which a thermal lance operates varies depending on the environment.Kosanke gives the maximum temperature to be 4500 °C (8130 °F), while Wang calculates it to be 2730 °C (4950 °F)

Parameter of underwater cutting torch

 Detailed pictures show of underwater cutting torch

 In 2011, JIANGSU XINGRUI PIPING CO.,LTD was formed to provide OXYGEN LANCE and THERMIC LANCE to the commercial steel-makingand foundry casting industry. We provided the base of industry blow oxygen or inject carbon into electric arc furnace solutions and skilled experience of exothermic cutting methods.
Today, the company operates within a 24,000 square foot multiplex in China,this location offers a large inventory storage capability and four workshops for complex on-site fabrication capable of designing and producing standard or customizedoxygen lancing pipe & thermic lances.

All Xingrui pipes are manufactured according to the highest relevant safety standards and passes our 
rigorous quality controls before dispatch.

Innovation and inspiration,we always meet and value your various requirements.

 Detailed  package of underwater cutting torch

Package: STRAPPED BUNDLE WRAPPED IN PLASTIC

 Application of underwater cutting torch

1. Melt-cutting and perforation: suitable for alloy castings of various materials, stainless steel castings, cast iron parts, cast steel parts, non-ferrous metal castings, disintegration of slag, casting risers, burrs, etc., metal, non-metal , concrete, rock and other perforations.

2,.cleaning: to solve all kinds of castings sand (sand sand / sand), casting core, casting internal hole sintered clay sand cleaning, the melting eye of each melting furnace, bridge, water outlet slag blocking problem

 More detailed information on underwater cutting torch, pls contact by Jane(at) .