Sweet potato starch drying equipment

Sweet potato starch dryer, also known as sweet potato starch drying equipment, adopts the national patent product airflow collision dryer invented by our company. It has passed the provincial scientific and technological achievements appraisal and won the first prize.The machine is first used in starch drying industry, saving 70% of coal than steam boiler.This machine saves energy, strengthens heat transfer effect, reduces heat energy consumption by 1/4.Low equipment height, compact structure, good stability of equipment, reduce the investment in plant civil construction.

     Sida starch dryer, according to different dialects and habits, also known as starch dryer, starch dryer, starch drying equipment, starch drying machinery and other names.Sida starch drying equipment is mainly used for starch drying, such as sweet potato starch, wheat starch, cassava starch, potato starch, potato starch, sweet potato starch, red potato starch, corn starch, banana starch, pueraria starch, pea starch, mung bean starch, lotus root starch and other starch drying.

Sida starch drying equipment adopts the principle of instantaneous drying, using the rapid movement of hot air, drive the wet material, make the wet material suspended in a hot air, so to strengthen the whole drying process, improves the heat transfer rate of mass transfer, after drying of material, the combined water can almost all removed (e.g. starch material feeding water content of 40% or less, such as finished discharging at 13.5%), and the dry material, won't produce bad phenomenon, higher yield than the general drying machine drying, the user can obtain higher economic benefit in the short run.

Advantages of starch drying equipment:

1. Saving investment in equipment with large drying strength: the processing capacity of airflow drying equipment is large, and its evaporation capacity ranges from 50kg/h to 2000kg/h, while saving investment in equipment with small volume is incomparable to other drying equipment.

2. High degree of automation and good product quality: the airflow drying materials are all carried out in the pipeline, and the drying time is very short (only 0.5-2 seconds).Therefore, automation can be achieved, the product does not contact with the outside world, small pollution, good quality.

3. Complete supply of equipment and free choice of heat source: the basic model is composed of air filter, heater, feeder, drying pipe, fan and cyclone separator.Customers may acquire dust remover or other auxiliary equipment as required.

4. As for heating method selection, airflow drying equipment has great adaptability.User can be selected according to the conditions of the area of steam, electricity, thermal oil, hot blast stove heating, at the same time, according to the material heat-resisting temperature (or hot air temperature) choice: 150 ℃ or less, can choose steam heating at 200 ℃ or less, electrical heating compensation (or steam heating, electricity or thermal oil heating);300 ℃ or less, the coal stove;At 600 ℃ or less.Oil-fired hot blast furnace.Short drying time, suitable for heat-sensitive materials, no contact with the outside, no pollution, good quality;

5. The equipment is provided in complete sets, and the heat source can be steam heating or supporting the use of coal-burning, oil-burning, gas-fired hot air stove, etc.

6. Basic airflow drying equipment, suitable for loose, small viscosity, finished products for particles and powder materials.This process is indicated as positive and negative pressure airflow drying, and users can choose the drying method in the form of positive pressure according to product characteristics.