Home > Products > High Performance Alloy > Monel 401 (UNS N04401)
Monel 401 (UNS N04401)
- T/T
You May Like
Product Description
*Similar Grade
Trademark | UNS |
Monel 401 | N04401 |
*Product Forms
Pipe, Tube, Sheet, Strip, Plate, Round Bar, Flat Bar, Forgings, Hexagon, Wire
*Brief
This alloy is designed for use in specialized electric and electronic applications. Alloy 401 is readily autogenously welded by the gas-tungsten-arc process. Resistance welding is a very satisfactory method for joining the material. It also exhibits good brazing characteristics. It is covered by standard UNS N04401.
*Chemical Composition,%
% | Ni | Fe | C | Mn | Si | P | S | Co | Cu |
Min | 43.0 | Rest | |||||||
Max | 45.0 | 0.75 | 0.10 | 2.25 | 0.25 | 0.02 | 0.015 | 0.25 |
*Typical Physical & Mechanical Property(Annealed)
Density | Melting point | Tensile strength, MPa | Yield strength, MPa | Elongation,% |
8.88 g/cm3 | 1280-1300℃ | 480 | 250 | Report |
*Specification
Rod, Bar, Wire, Forgings | ASTM B164/ASME SB164, DIN 17752-17754 |
Plate, Sheet, Strip | ASTM B127/ASME SB127, DIN 17750 |
Pipe, Tube | ASTM B163/ASME SB163, ASTM B725/ASME SB725, ASTM B775/ASME SB775, ASTM B751/ASME SB751, DIN17751 |
Others | ASTM B366/ASME SB366(Fittings), DIN 17743 |
*Feature
Monel 401 is a ductile Nickel-Copper alloy with a very low coefficient of electrical resistivity and resistance to a wide variety of corrosive conditions. Like with commercially pure Nickel, Monel 401 is low in strength in the annealed condition and can only be cold worked to a maximum of 120 KSI.
*Application
1. Marine engineering
2. Chemical and hydrocarbon processing equipment
3. Gasoline and freshwater tanks
4. Crude petroleum stills
5. De-aerating heaters
6. Boiler feed water heaters and other heat exchangers
7. Valves, pumps, shafts, fittings, and fasteners
8. Industrial heat exchangers
9. Chlorinated solvents
10. Crude oil distillation towers
Contact Us
- Danyang HB Special Alloy Co.,Ltd
- Contact nameSerin Shen Chat Now
Product Categories
| Precision Alloy | High Performance Alloy | Heating Alloy | Special Welding Wire |
New Products
Popular Searches
- aluminum alloy
- Copper Alloy
- Nickel Alloy
- Magnesium Alloy
- alloy steel
- copper coil
- ingot
- Welding Wire
- ferro alloy
- Silicon Manganese Alloy
- Ferro Silicon Alloy
- Plate Steel
- Silicone Carbon Alloy
- high temperature alloy
- alloy wire rod
- nickel base
- nimonic 80a
- superalloy
- heater wire
- phosphor bronze
- Silicone Barium Calcium Alloy
- high temp
- Pipe Alloy
Recommended Products
- fused cast zirconia corundum brick
- Glass kiln high temperature refractory material, the source manufacturer, China famous brand
- fused cast zirconia corundum brick
- fused cast zirconia corundum brick
- Magnesium oxide 90%
- Shandong supplier fiber reinforced calcium silicate board
- Placa de silicato de calcio 1000 * 500 * 50 mm
- High density thermal insulation material, high-temperature refractory lining
- High density calcium silicate board, carbon fiber, glass fiber
- High density non stick calcium aluminosilicate board
- Cement plant, power plant, aluminum plant, steel plant, chemical plant, metallurgical industry, thermal insulation board
- Chinese Shandong manufacturer calcium silicate insulation board
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Refractory Material > Special Refractory Material
Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Serin Shen
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile