RTV-2 liquid Electronic Potting Silicone Compound LED products silicone rubber

Description of RTV-2 liquid Electronic Potting Silicone Compound

RTV-2 liquid Electronic Potting Silicone Compound is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time.

Application of RTV-2 liquid Electronic Potting Silicone Compound

RTV-2 liquid Electronic Potting Silicone Compound is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB, substrate, etc.

Technical Parameters of RTV-2 liquid Electronic Potting Silicone Compound

(Pls note: the above data for this product in 25 ℃ temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)

SHELF LIFE AND TRANSPORTATION of RTV-2 liquid Electronic Potting Silicone Compound

1. Twelve(12) months when stored at 25C in tightly closed original packages.

2. This kind of product is non-dangerous product, which could be transported as general chemicals.

3. Storage beyond the expired date does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

PACKAGE of RTV-2 liquid Electronic Potting Silicone Compound

50Kg/pail as a set (Part A 25Kg + Part B 25Kg)
400Kg/pail as a set (Part A 200Kg + Part B 200Kg)

SHELF LIFE:

12 months when stored under 25°C in original unopened packages.

Techinical Support

Normally, different silicone should be choosed according to different product's features,for example :

- For products size (within 20cm), 

with intricate disigns, soft silicone is suitable, such as 10-20 shore A.

- For products size (20cm-80cm), 

with intricate designs, 20-25 shore A is suitable. 

with simple designs, 25-30 shore A is suitable.

- For products size (80cm-150cm), 

with intricate designs, 25 shore A is suitable.

with simple designs, 30-35 shore A is suitable.

- For products size (more than 150cm), 

with intricate designs, 25-28 shore a A is suitable.

with simple designs, 35-40 shore A is suitable. 

Company Information

 Shenzhen Zhihua Chemical Co., Ltd.(DC SILICONE) waswas established in 2008,is a science and technology Company which is concentrating on production, R&D, and sales of Chemical products, especially silicone rubber. We are praised as the leading professional manufacturer of Mould Making Silicone Rubber,Addition Silicone Rubber,Life Casting Silicone Rubber,Electronic Potting Compound,Pad Printing Silicone Rubber,and so on.we are welcome to all the customers come to visit our factory and have a fruitful bussiness relationship.

FAQ

Q: Do you have a factory?

A:We have factory in Shenzhen. As a leading manufacturer of silicone rubber in China, we are standing in silicone field for nearly 10 years, depends on our high quality products and best service.

Q:How can I get the samples?

A:1,We are honored to offer you samples. Testing is believing. So we can provide you 1kg free sample by air. The silicone sample is free for you, and you should only pay the small part of shipping cost by air. But when we have a successful cooperation in the future we will return the air shipping cost you paid before.

Q: How about the lead time?

A: Within10-20 days after getting the prepayment.

Q: How can we pay?

A: For small sample shipping cost, you can pay either by paypal or western union or by T/T.

Q: Can you do CO, Form E, Form F, Form A etc? 

A: Yes, we can do them for you without extra cost. We are always finding ways to save cost for you.

Any question pls do not hesitate to contact Ms. Emily