Industrial electronics X Ray inspection equipment X5600 desktop xray machine for defect inspecting

5: BGA/QFN inspection

6: Aluminum die casting

7: Mould

8: Electrical and mechanical   components

9: Biological agriculture seed

10: Aviation component

11: Wheel hub

12: Wire/USB/Plug

X-ray detector can move along Z   direction, Speed   of table moving along X-Y direction can be adjusted.

Larger   effective detection range, improving the magnification and the detection   efficiency of the product.

Long life X-ray tube, maintenance free for life

Adopt the   world's top Japanese Hamamatsu X-ray source

Fault   less than 2.5μm can be detected. High detection repeat accuracy.

Easy to   distinguish the gold wire bending and break of the semiconductor package.

Powerful CNC Measuring Function, can   inspect automatically, testing program can be edited.

Suitable for   large-scale inspection and improve detection efficiency.

Small body, easy to place, less space

Can be used in   laboratories, materials rooms, etc.

Large   navigation view, table will move to where you click the mouse.

Very easy to   operate, quickly find item defects and improve detection efficiency

H

A

R

D

W

A

R

E

X-RAY tube

Tube type

Sealed microfocus X-ray tube

Maximum tube voltage

90kV

Maximum tube current

200uA (Software   limit 89uA)

Focal spot size

5μm

Cooling method

Convection   cooling

Detector

Detector type

HD digital flat   panel detector (FPD)

Imaging area

57mm*64mm

Photosensitive   unit size

49.5μm

Pixel matrix

1152*1300   pixels

Magnification

500X

Image speed

20fps

Inspection   speed and accuracy

Repeated test   accuracy

3μm

Software   inspection speed

3.0s/point   (Excluding loading and unloading time)

Table

Standard size

250mm*250mm

Effective   inspection area

230mm×230mm

Load capacity

≤5Kg

CNC programming

Test parameters for different   products can be stored in categories and called at any time. You can set the detection route or sequence of one or more products,   and the program automatically completes the detection and stores the photos.

Operating   platform

Mouse,   keyboard, 2 operating modes

Shell

Inner lead   plate

5 mm thick lead   plate (isolate radiation)

Dimensions

730mm(L) * 1000mm(W)   * 1100mm(H)

Weight

510Kg

Other   parameters

Computer

24 inches   Widescreen LCD/I3 CPU/2G Memory/200G hard disk

Power supply

AC220V  10A

Temperature and   humidity

22±3℃     50%RH±10%RH

Total power

1500W

Safety

Radiation safety   standard

Adopt   steel-lead-steel protection structure. Any position 20mm from the shell, radiation≤1μSV/H, in line with   international standards    

Safety interlock function

Two   high-sensitivity limit switches are set in the door opening position for   equipment maintenance. Once the door is opened, the X-ray tube will   automatically power off immediately.

Electromagnetic switch protection

The observation   window has an electromagnetic switch, and the observation window cannot be   opened when the X-ray tube is in working state.

Observation window

With an   observation window, the sample can be observed directly from the window while   the machine is running.

Emergency stop

The emergency   stop is set in the prominent position of the operation console and the   equipment body, can be pressed to quickly cut off the power supply system.

X-ray tube automatic protection

Five minutes   after the machine has no operation, the X-ray tube will automatically power   off and enter the protection state.

Automatic machine protection

Once any door   or window of the machine is turned on, the machine immediately enters the   shutdown protection state, and any operation cannot be performed.

S

O

F

T

W

A

R

E

Bad welding judgment

BGA short

Preset NG images,   software contrasts and recognizes automatically

BGA cold solder

Preset NG images,   software contrasts and recognizes automatically

BGA voids

Preset NG images,   software contrasts and recognizes automatically

BGA false   solder

Preset NG images,   software contrasts and recognizes automatically

CNC function

Motion mode   programming (CNC)

Test parameters   of different products, can be classified and stored, call at any time

Can set the inspection   route or sequence of one or more products

Navigation   window

The picture of the   table is displayed on the screen in real time, Click any position of the   picture to control the movement.

Voids measurement

Voids rate measurement

Optional   manual/automatic measurement, single/multi-ball measurement mode. The bubble   area standard can be preset for automatic measurement.

Report   generation

The judgment   result can be directly marked on the picture, or directly generate a CSV file   or a report document according to the analysis results.

Measurement   function

Area measurement

Preset area   size standard, NG product prompt function.

Size measurement

Distance,   gold line curvature, slope, angle, etc.

Motion control

Automatic   positioning

Power on table auto zero function, system reset

Batch test

Import pre-production   program to realize fast automatic positioning function, convenient for   large-scale inspection and product series management

Field of view   switching

The interface can be   quickly switched between 2 inches and 4 inches to realize the two detection   requirements of large field of view browsing and partial detail observation,   saving detection time and improving detection efficiency.

Control mode

CNC Automatic control,   manual control keyboard, mouse, 3 modes are optional.

Auxiliary positioning

Laser positioning

Red   dot laser positioning, double auxiliary, easy to navigate

Navigation magnifier

It   can enlarge the product detection points in the navigation window, which is   easy to accurately locate and improve the detection efficiency.

90KV-5um Sealed X-ray tube

1

Pcs

Japan HAMAMATSU

Table

1

Pcs

Size: 250mm*250mm

Flat Panel Detector

1

Pcs

America Dalsa

Image CPU

1

Pcs

Intel I3 CPU

LCD

1

Pcs

24 inches