Car neck massager Factory direct massager used by many foreign companies car neck massager

Low noise and high temperature resistance: the motor casing is made of seamless steel pipe, built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire, so the noise is low and the temperature is high and safe.

Today, let's talk about why the motor casing should be made of seamless steel pipe. The motor casing is divided into a seamless steel pipe casing and a metal coil casing, which directly affects the cooperation and the use of the motor. The seamless steel tube casing is integrally formed. The iron coil casing is spliced with iron. In use, the seamless steel casing motor has better heat, vibration, noise, energy saving and final service life than the iron coil casing motor. All are twice as good, of course, the price is also higher, the so-called one penny.

With the continuous improvement of living standards, the number of household electrical and electronic equipment is increasing, and the electromagnetic harassment between electrical products is increasingly complicated. Such a bad electromagnetic environment will also have a negative impact on people's living ecology. In order to operate in an electromagnetic environment, Haorui Massager does not have unbearable electromagnetic interference capability to any equipment in its environment and is immune to electromagnetic interference from other electronic devices. The built-in EMC anti-interference of the motor is installed to effectively avoid daily consumers. Cultural life and even personal safety will have an impact and harm.

In order to survive the price war, there are various ways to reduce costs in the industry, such as power adapters, movements, motors, leather cases, sponges, etc. Moreover, even with the same type of motor, the prices of different regions, different materials, and different manufacturers vary greatly. And these are the consumers' faces and they are difficult to distinguish. There is no way to change the motor on the outer casing. Many massager companies are working hard on high-cost copper wire. The market is born with copper-clad aluminum, aluminum wire and other motors, even copper wire of pure copper wire motor. The size of the taper, the hardness of the toughness, and even the non-standard copper wire, etc., can not talk about the insulation high temperature grade. In this case, Haorui Massager Co., Ltd. has always adopted built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire seamless steel tube motor, insulated copper wire high temperature 130C°, effectively reducing noise while improving The temperature rating makes the product quality higher and safer.

Core advantages

1）We export to 23 countries and regions

2）Special product can be order with one pcs.

3）adhere to the use of environmentally friendly energy-saving materials

4）Quality Supervision Institution Testing and Certification Guarantees Safety

5）6 years insisting on the production of quality

6）85% of the business comes from the referral of old customers

7）2535 customers serving no quality complaints for 5 consecutive years

8）management systems certificated by Medical Device Quality Management System. We can trace down to the responsible persons even for the tiniest details

Fu An Qi Rui massager features:

1.we only want to serve the distinguished 20% of the market share

Only serve for the 20% esteemed customers

2.95 % of the customers order on payment never meet with us

3.Qirui is not a small workshop. We have a 500 square meters office

4.5 years senior membership of Alibaba Gold Supplier of domestic trade which is featured with price transparency no hidden costs

5.We are a enterprise that participates in charitable and voluntary activities to give back to the society and fulfill our social responsibility

6.Self-owned R&D team, more than half of the R&D staff have been working on R&D for more than 10 years

7.Adopting the only intelligent automatic CNC machining center in Fu'an, the whole production line has almost no manual labor

Technical performance

1.The use of high-precision, high-hardness synchronous gear, imported DuPont POM achieving level 5 of material accuracy, the tooth surface is more wear-resistant, thus improving the life of the massager, but also effectively reduce the noise

2.Low vibration: Although the rotor has been precision machined, it has become in equilibrium. However, it is still balanced by high-precision dynamic balancing equipment. Therefore, the motor running vibration is very small.

3.Stable performance: key parts such as motor rotor and shaft are equipped with advanced CNC machining equipment to improve the interchangeability of parts.

4.Magnetic tile and carbon brush high efficiency, so the performance is stable, the motor uses double high material high-performance magnetic tile and high-quality carbon brush is more wear-resistant and non-magnetic loss, high efficiency, stable performance, and increased service life.

5.The transmission is stable and the bearing capacity is high: the worm teeth mesh with the worm gear teeth continuously, and there is no process of entering and exiting the meshing, so the work is stable, avoiding the pulsating noise, shock and vibration that instantaneously burst at the time of starting.

6.High safety, low noise, low temperature rise, built-in surge protector, motor rotor is made of high quality silicon steel sheet with copper material, temperature rise under normal load is less than 60K (ambient temperature 25°c), this series adopts high precision Low noise Z4 bearings further reduce noise and losses.

7.which are different from competitors' manufacturing processes. 23 heavy-duty inspections, all massager products including accessories, have achieved standardized design and production. Each product will undergo 20 minutes of silent testing and 40 minutes of performance testing before leaving the factory.

8.Use PTC ceramic heating components consume small power, controllable temperature, fast heating, instantaneous current surge protection, power consumption per hour only ￥0.02

9.The shell of the massager is made with imported original ABS, which is never doped with black material of secondary material. It has high toughness, impact resistance, higher strength and environmental protection. Its raw materials and manufacturing quality are more reliable and synchronized with top-level brands at home and abroad.

10.Low noise and high temperature resistance: the motor casing is made of seamless steel pipe, built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire, so the noise is low and high temperature resistant is good and safe。

11.Over 50,000 times of bionic resistance flexing test, green and environmentally friendly low-carbon formaldehyde-free skin-friendly leather, strictly in accordance with the "one inch and seven needles" international standard, hand-sewn, the length of the stitching is controlled at 0.4cm, and the error is less than 0.25mm. European and American standards will save your cost at least 30%。

12.U.S. DuPont POM Synchronous Gear Massage Head.

13.High temperature 60C°±2C°, low temperature -20C°±2C°, high and low temperature weather resistance recycling test, no cracking, no abnormality, ensuring stable quality.

Rui Rui insists on using environmentally friendly energy-saving materials

Tired to use the Rui Rui massager

Qirui massager for backache

E-mail：qiruigm@gmail.com

WhatsApp:13850385558

Facebook:13850385558