Home > Products > ADSS Fiber Optic Cable > ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
ADSS Optical Fiber Cable-24 Fibers (SM G.652D)
- SHENZHEN
- T/T Other
- 5 days
You May Like
Product Details
Place of Origin | China |
Product Description
Loose tube cable is a design that has high tensile strength and flexibility in a compact cable size. Our loose tube cable provides excellent optical transmission and physical performance.
Features
The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate material is applied over fiber cladding as optical fiber primary protective coating. The detail data of optical fiber performance are shown in the following table.
G.652D fiber use special spun device successfully controlled the value of PMD, and make sure that it keeps stable in cabling.
Approved by optical communication products ministry of quality supervision and inspection center, the connection between OFS fiber in and outside is good .The single-end connect-loss won’t be over 0.1 dB and the double-end connect-loss is all little than 0.05dB.
Apply to non-relay communication network. Features: proof test >1%.
Applications
ADSS optical fiber cable plays a significant role in the communication industry. Its usage is gradually increasing with more people choosing it in expense of other fiber cable. Some of its outstanding features have enhanced its demand throughout the market.This article analyses the key applications of the ADSS optical fiber cable. The research showed that, ADSS optical fiber cable’s demand is high particularly in areas of transmitting high-voltage power.
Specifications
G652D In cable
Category | Description | Specifications | |
Before cabling | After cabling | ||
OpticalSpecifications | Attenuation @1310 nm | ≤0.34 dB/km (max.) | ≤0.36 dB/km (max.) |
Attenuation @1550 nm | ≤0.20 dB/km (max.) | ≤0.22 dB/km (max.) | |
Attenuation @1625 nm | ≤0.23dB/km | ≤ 0.25 dB/km | |
Zero Dispersion Wavelength | 1300~1324 nm | ||
Zero Dispersion Slope | ≤ 0.092 ps/nm2·km | ||
PMD Link value (M=20cables Q=0.01% )maximum PMDQ | 0.2 ps/√km | ||
Cable Cutoff Wavelength (λcc) | ≤1260 nm | ||
Macro bending Loss(100 turns; Ф50 mm) @1550 nm(100 turns; Ф50 mm) @1625 nm | ≤ 0.05 dB≤ 0.10 dB | ||
Mode Field Diameter @1310 nm | 9.2±0.4μm | ||
DimensionalSpecifications | Cladding Diameter | 125 ±0.7μm | |
Core/clad concentricity error | ≤0.5μm | ||
Cladding Non-Circularity | ≤1.0% | ||
MechanicalSpecifications | Proof stress | ≥0.69Gpa |
Cable type: ADSS For Aerial & Duct installation cable
Dimension and Properties | |||
General properties | Unit | Nominal value | |
Fiber count (G.652D) | PC | 24 | |
Max. No of loose tube / Fillers | PC | 6/0 | |
Fiber No. per tube | PC | 4 | |
Central strength member | / | FRP*2.0±0.2mm | |
Aramid Yarn | material | Kevlar | |
Loose tube | Diameter | mm | 2.0±0.2 |
Material | / | PBT | |
Outer sheath | Thickness | mm | 1.8±0.2 |
Material | / | HDPE | |
Cable OD | mm | 11.0±0.5mm | |
Max. allowable pulling force | N | 3000 | |
Max.Crush resistance | N/100mm | 4000 |
Working conditions
Working conditions | ||
Temperature range | Transport and storage:- 40℃ to +70℃ | Min Bending Radius |
Installation:-40℃ to +60℃ | Installation:20 x OD | |
Operation:-40℃ to +70℃ | Operation:10 x OD |
Note:
1. the nominal outer diameter may vary by ± 5%.
2. The nominal cable weight may vary by ±10%.
3. The nominal cable length each drum may vary by ±20%.
Contact Us
- FIBERLINK COMMUNICATION LIMITED
- Contact nameSam LEE Chat Now
- Phone86-755-83582613
- AddressNanshan District, Shenzhen, Guangdong
Product Categories
New Products
-
Wall mount Multi-Operator MDU Distribution Box
-
24 Fibers OM3 MPO-LC LGX Cassette Box
-
Planar Lightwave Circuit (PLC) Splitter
-
1x32-rack-mount-plc-fiber-optic-splitter-with-sc-apc
-
1x16-sc-abs-box-plc-fiber-optic-splitter
-
PTO Series Pre-terminated Wall Outlet with Drop Cable
-
FTTx Fiber Access Terminal Box (FLK-FTB-304B)
-
FTTx Fiber Access Terminal Box(FLK-FTB-301B)
-
FTTH Fiber Optic Outlet(FLK-FTB-301A)
-
1 Core Fiber Access Terminal Box (FLK-FTB-301C)
-
1 Cores Fiber Access Terminal Box (FLK-FTB-301D)
-
Indoor FTTx Fiber Access Terminal Box(FLK-FTB-302A)
-
FTTx Fiber Access Terminal Box Distribution Box(FLK-FTB-302B)
-
2 Cores Fiber Access Terminal Box (FLK-FTB-302C)
-
FTTx Fiber Access Distribution Terminal Box (FLK-FTB-302D)
-
FTTx Fiber Access Distribution Terminal Box (FLK-FTB-302E)
-
2 Cores Fiber Access Terminal Box (FLK-FTB-302F)
-
4 Cores Fiber Access Terminal Box (FLK-FTB-304A)
Popular Searches
- optical fiber
- communication cable
- patch cord
- ftth
- fiber optic cable
- optical fiber cable
- drop cable
- fiber optic patch cord
- outdoor fiber optic cable
- telecommunication cable
- anchor clamp
- ftth drop cable
- armored cable
- ftth cable
- gyfty
- gytc8
- aerial cable
- gjxfh
- fibre optic cable
- adss clamp
- adss optical fiber cable
- core cable
- self supporting aerial cable
Recommended Products
- Oven Protection Sleeve , Fiber Optic Heat Oven Sleeve
- 1x32 MEMS optical switch
- 1X24 MEMS Fiber Optical Switches
- 1X24 MEMS optical switch module -xionghua
- 1550nm 1X16 MEMS optical switch
- 1X16 MEMS optical switch module
- SM 1X4 MEMS optical switch
- 1310nm 1X4 MEMS optical switch module
- 1550nm 1X8 MEMS optical switch module
- MEMS 1x8 Fiber Optical Switch —xionghua
- DC-BLOCK DB-4310FM-6
- F/UTP Cat.6A Patch cord 23AWG 7*0.2 LSZH - 2m
Find Similar Products By Category
- Electrical & Electronics > Telecommunication & Broadcasting > Fiber Optic Equipment

Product Tags:
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sam LEE
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile