SS316 Drop Safe Wire Cable Nets for Falling Accident Prevention in Drilling Works

Dropped Objects Prevention Safety Nets

Secondary retention nets preventing corrosion dropped object accidents

Dropped objects are a major source of incidents in heavy industries. In the drilling industry offshore dropped objects are listed in the top ten of most frequent incidents. By securing overhead fixtures using secondary locking devices and additional securing techniques incidents are prevented and risk for personnel is reduced significantly.

Dropped objects are prevented using secondary retention nets. These specifically designed safety nets secure, enclose and tether overhead fixtures with the purpose to prevent a fixed item from falling when its primary attachment fails. The nets are designed for onshore and offshore installations.

The nets can for example enclose and tether overhead fixtures, such as; lights, beacons, speakers, self-retracting lifelines, CCT’s, anodes, pipe clamps and other items that are located above personnel and critical equipment.

The nets fully encloses the item being secured, while the integrated securing cable attaches around a structural attachment point, preventing both the item and fixture components from dropping or falling.

Drop save nets are made out of high grade stainless steel. Grade stainless steel Aisi316 is the preferred steel for use in marine environments because of its greater resistance to pitting corrosion than other grades of steel.A carabiner hook will make it easy to attach the unit to a secondary retention point.

Where to use dropped object prevention safety nets

Fixtures located above personnel and critical equipment

Fixtures on mobile equipment (e.g. crane booms, derricks, drill rigs, draglines and shovels)

Fixtures in potential impact zones of mobile equipment

Fixtures and mountings exposed to vibration wear and fatigue

Fixtures prone to oxidation and galvanic corrosion

Fixtures located in areas difficult to access for maintenance or inspection

Fixture types

Flood lights

Strip lights

Navigation lights

Speakers

CCTV Cameras

Self-Retracting Life Line

Pipe clamps

Anodes

Junction boxes

Heat and smoke detectors

Dropped object prevention safety net features

1.Designed and tested to over five times (5x) the product Safe Working Load (SWL)

2.Withstands extreme high temperatures up to 500°C (932°F)

3.Withstands extreme low temperatures down to -40°C (-40°F)

4.Able to retain most fixture mounting brackets (if SWL not exceeded)

5.SUS/AISI 316 stainless steel wire and components

6.Available for a wide range of fixtures (custom designs also available)