Glass reinforced plastic softens water tanks price Using this Dictionary

Resin tank as long as damage is generally not maintenance, can only be replaced, but the tree in the choice of resin resin tank to choose to have a liner, because no liner resin tank easy aging crack, my company perennial supply of high quality softening water resin tank: stainless steel resin tank to provide replacement services.Choose Beijing fengyuhua environmental protection technology co., LTD. Softening water resin tank Beijing lowest price, quality assurance, models complete, specifications, good quality, nationwide delivery, large discount wholesale!!!Is the resin tank containing PE liner, read the temperature of water, acid and alkali resistance, and not easy to aging, long service life, large preferential, really benefit customers, in addition, the company also sell low price filter element, water pump, water tank and other water treatment equipment accessories, welcome the majority of customers enthusiastically order!

Softening resin tank mainly divided into three

Glass reinforced plastics (FRP) without inner liner usually consists of four layers: inner surface layer, inner layer, strength layer and outer surface layer.Other hierarchical structures may be adopted as required;The wall thickness of the tank changes according to the design requirements.

2. The resin content of the surface layer and inner layer of the cylinder body varies according to different storage media.

3. The cone Angle of the inner wall exceeds 1°.

4. Under the loading condition, the allowable circumferential strain of the tank wall shall not exceed 0.1%.

5. For the filament winding layer, when the spiral winding Angle is 80°, the axial tensile strength is no less than 15MPa.

The softening tank is made of 304 stainless steel (other materials, such as 316L stainless steel, 201 stainless steel, etc., can be customized according to the requirements). It is coated with nano antibacterial epoxy powder, which is firmly adsorbed on the inner wall of the softener after electrostatic adsorption in the 170-degree oven.Softener in the resin, for the hardness of water is higher, reduce the hardness of water.

Product name: stainless steel resin tank, stainless steel filter tank

Purpose: soft water treatment, reverse osmosis treatment.Stainless steel ion exchange, tank made of 304 stainless steel material, replace the traditional glass fiber reinforced plastic or carbon steel material, suitable for the higher requirements of the unit, such as: pharmaceutical, food enterprises.

Features: stainless steel tank stainless steel water softener, also known as softening tank, using high quality food grade SUS304 stainless steel material, surface polishing, inner coating epoxy resin anticorrosion, super thickness, will not crack, deformation, good leakproof effect, easy to operate.

The resin tank is also a glass reinforced plastic tank. In general, the number like 1665 we refer to refers to the type of resin tank. 16 refers to the diameter of the tank is 16 inches, which is roughly 40 centimeters in centimeters, and 65 refers to the height of the resin tank is 65 inches, which is roughly 165 centimeters.As the resin tank needs to be installed indoors, the space is limited, so the size of the tank is one of the important factors to be considered when buying the tank

Contact suffix - copy. PNG

Glass reinforced plastic with liner

Stainless steel tank

Softening resin tank - material

1. Alkali free fiberglass fiber roving without twist should comply with JC/T277, medium alkali fiberglass fiber roving without twist should comply with JC/T278

2. Non-alkali fiberglass roving without twist should comply with the provisions of JC/T281

3. Fiberglass chopped strand mat and surface mat shall be provided with chemically compatible impregnating agent of resin system.

4. Organic fiber surface mat or other materials can also be used

Softening resin tank - technical requirements

The tank usually consists of four layers: inner surface layer, inner layer, strength layer and outer surface layer.Other hierarchical structures may be adopted as required;The wall thickness of the tank changes according to the design requirements.

2. The resin content of the surface layer and inner layer of the cylinder body varies according to different storage media.

3. Cone Angle of inner wall exceeds 1°

4. Under loading conditions, the allowable circumferential strain of the tank wall shall not exceed 0.1%

5. For the filament winding layer, when the spiral winding Angle is 80°, the axial tensile strength is no less than 15MPa